Engine Performance - Test
在最少 60% 的负荷下运行发动机至少 2 小时。
- 监测发动机的运行。
- 观察 Messenger 显示器或 Cat 电子技师(ET)。 确保读数在正常范围。
- 记录该数据。 保持发动机性能数据的记录。
Caterpillar Information System:
C15 Petroleum Engines Electrical Power Supply - Test
G3304B and G3306B Engines Starting with Jump Start Cables
G3304B and G3306B Engines Before Starting Engine
G3516 Petroleum Engine Control Panel - Inspect/Test
C15 and C18 Petroleum Generator Sets Refill Capacities
XQ60 Rental Generator Set Sensors and Electrical Components
C3.4B Industrial Engine Sensors and Electrical Components - Aftertreatment
C15 Petroleum Engines Electronic Control Module - Remove and Install
G3500J Engines Refill Capacities
3116 and 3126 Marine Engines Coolant - Change
C4.4 Industrial Engine Exhaust Elbow - Remove and Install - Top Mounted and Side Mounted Turbocharger Exhaust Elbow
C27 Generator Set Hoses and Clamps - Inspect/Replace
C15 Petroleum Engines Air Shutoff - Remove and Install
G3500 Engines Coolant Level - Check
G3500 Engines Coolant (DEAC) - Change
300.9D and 300.9D VPS Mini Hydraulic Excavator Engine Valve Lash - Check/Adjust
C4.4 Industrial Engine Turbocharger - Install - Top Mounted Turbocharger
C4.4 Industrial Engine Turbocharger - Remove - Top Mounted Turbocharger
C4.4 Industrial Engine Turbocharger - Remove - Side Mounted Turbochargers
C4.4 Industrial Engine Turbocharger - Install - Side Mounted Turbochargers
2011/04/04 An Updated Procedure for Manual Engine Shutdown in the Engine Operation and Maintenance Manual (OMM) Is Available {1000}
C15 and C18 Petroleum Generator Sets Control Panel - Inspect/Test
C15 and C18 Petroleum Generator Sets Coolant (DEAC) - Change
C15 and C18 Petroleum Generator Sets Coolant Level - Check