Exhaust Elbow - Remove and Install - Top Mounted and Side Mounted Turbocharger Exhaust Elbow
拆卸步骤
开始:
- 将排气背压阀从排气弯头上拆下。 有关正确步骤,请参阅拆解和装配, "排气背压阀 - 拆卸和安装"。
Show/hide table
图 1 | g02476645 |
典型示例 |
- 将螺母 (4) 从涡轮增压器 (6) 上拆下。
- 在排气弯头 (2) 和涡轮增压器 (6) 上做临时标记,以显示正确方位。 将排气弯头 (2) 从涡轮增压器 (6) 上拆下。
- 将密封垫 (5) (未显示)从涡轮增压器 (6) 上拆下。
- 如有必要,将螺柱 (3) 从涡轮增压器 (6) 上拆下。
安装步骤
Show/hide table
图 2 | g02476645 |
典型示例 |
- 确保排气弯头和涡轮增压器的出口没有损坏。 更换任何损坏的部件。
- 如有必要,将螺柱 (3) 安装到涡轮增压器 (6) 上。 拧紧螺柱至扭矩 18 N·m (159 lb in)。
- 将新的密封垫 (6) (未显示)定位到涡轮增压器 (6) 上。
- 将排气弯头 (2) 安装到涡轮增压器 (6) 上。 确保排气弯头朝向正确。
- 将螺母 (4) 安装到涡轮增压器 (6) 上。 拧紧螺母至扭矩为 44 N·m (33 lb ft)。
End By: 将排气背压阀安装到排气弯头上。 有关正确步骤,请参阅 拆解和装配, "排气背压阀 - 拆卸和安装"。
Caterpillar Information System:
C27 Generator Set Hoses and Clamps - Inspect/Replace
C3.4B Industrial Engine Monitoring System - Table for the Indicator lamps
C27 Generator Set Generator Operation
UPSB505 Uninterruptible Power Supply UPS Characteristics
G3304B and G3306B Engines Configuration Parameters
C15 and C18 Petroleum Generator Sets Configuration Parameters
G3304B and G3306B Engines Sensors and Electrical Components
UPSB505 Uninterruptible Power Supply Mimic Panel Indicator
UPSB505 Uninterruptible Power Supply Life Cycle Monitoring
C15 Petroleum Engines Belt Tensioner - Remove and Install
C15 and C18 Petroleum Generator Sets Reference Information
UPSB505 Uninterruptible Power Supply Time and Date Adjustment
3116 and 3126 Marine Engines Coolant - Change
G3500J Engines Refill Capacities
C15 Petroleum Engines Electronic Control Module - Remove and Install
C3.4B Industrial Engine Sensors and Electrical Components - Aftertreatment
XQ60 Rental Generator Set Sensors and Electrical Components
C15 and C18 Petroleum Generator Sets Refill Capacities
G3516 Petroleum Engine Control Panel - Inspect/Test
G3304B and G3306B Engines Before Starting Engine
G3304B and G3306B Engines Starting with Jump Start Cables
C15 Petroleum Engines Electrical Power Supply - Test
G3304B and G3306B Engines Engine Performance - Test
C15 Petroleum Engines Air Shutoff - Remove and Install