Engine Valve Lash - Check/Adjust
Megjegyzés A garanciális időszakban ezt az eljárást kizárólag Cat márkakereskedők szakemberei végezhetik.
A motorszelep hézagjának beállítására vonatkozó teljes eljárást a Szervizkönyv tartalmazza.
Megjegyzés Kizárólag szakképzett gépszerelő dolgozhat a motoron. Speciális szerszámok és képzés szükséges.
Caterpillar Information System:
G3500 Engines Coolant (DEAC) - Change
G3500 Engines Coolant Level - Check
C15 Petroleum Engines Air Shutoff - Remove and Install
G3304B and G3306B Engines Engine Performance - Test
C15 Petroleum Engines Electrical Power Supply - Test
G3304B and G3306B Engines Starting with Jump Start Cables
G3304B and G3306B Engines Before Starting Engine
G3516 Petroleum Engine Control Panel - Inspect/Test
C15 and C18 Petroleum Generator Sets Refill Capacities
XQ60 Rental Generator Set Sensors and Electrical Components
C3.4B Industrial Engine Sensors and Electrical Components - Aftertreatment
C15 Petroleum Engines Electronic Control Module - Remove and Install
C4.4 Industrial Engine Turbocharger - Install - Top Mounted Turbocharger
C4.4 Industrial Engine Turbocharger - Remove - Top Mounted Turbocharger
C4.4 Industrial Engine Turbocharger - Remove - Side Mounted Turbochargers
C4.4 Industrial Engine Turbocharger - Install - Side Mounted Turbochargers
2011/04/04 An Updated Procedure for Manual Engine Shutdown in the Engine Operation and Maintenance Manual (OMM) Is Available {1000}
C15 and C18 Petroleum Generator Sets Control Panel - Inspect/Test
C15 and C18 Petroleum Generator Sets Coolant (DEAC) - Change
C15 and C18 Petroleum Generator Sets Coolant Level - Check
G3304B and G3306B Engines Control Panel - Inspect/Test
G3406 Engine Battery - Replace
G3304B and G3306B Engines Coolant (NGEC) - Change
G3304B and G3306B Engines Crankcase Blowby - Test/Record