Belt Tensioner - Check
Inspect the belt tensioner for unusual noise, excessive looseness and/or shaking of the bearings.
Show/hide table
Illustration 1 | g00659636 |
(1) Belt tensioner |
Check the position of the belt tensioner in order to maintain the proper belt tension. Refer to Specifications, "Belt Tension Chart" for the proper belt tension.
Caterpillar Information System:
120M Series 2, 12M Series 2, 140M Series 2 and 160M Series 2 Motor Graders All Wheel Drive Power Train Control Manifold (All Wheel Drive)
Reusability Recommendations for Duo-Cone Seals {7555, 7561} Reusability Recommendations for Duo-Cone Seals {7555, 7561}
2011/01/12 An Improved Procedure for Using an ECM for a Machine Test Is Now Available {7610}
Procedure to Use a Machine Electronic Control Module (ECM) for Machine Testing{7610} Procedure to Use a Machine Electronic Control Module (ECM) for Machine Testing{7610}
C-12 Engine Air Compressor - Check
C-12 Engine Configuration Parameters
2010/12/23 New Colors for the Injector Seals for C175-16 Generator Set Engines {1251, 1254, 1290, 1713, 7555}
C175 Generator Sets Engine Oil Sample - Obtain
C-12 Engine Plate Locations and Film Locations
C-12 Engine Product Description
3512B Oil Well Servicing Engines Air Shutoff
3116 and 3126 Marine Engines Fuel System Water Separator - Check/Drain
C-12 Engine Belts - Inspect/Adjust/Replace
UPSB220 Uninterruptible Power Supply Logged Events
UPSB220 Uninterruptible Power Supply Measurement System
UPSB220 Uninterruptible Power Supply Statistics
UPSB220 Uninterruptible Power Supply Time and Date Adjustment
2010/12/23 The Adapter for the High Pressure Fuel Rail Pressure Sensor Is Not Serviced for C175-16 Generator Set Engines {127A, 1718}
C15 and C18 Petroleum Generator Sets Coolant Temperature Regulator - Replace
C-12 Engine Engine Valve Lash - Check
C-12 Engine Fuel Injector - Inspect/Adjust
Installation of the Water-Cooled Throttle for G3500C and G3500E Generator Set Engines{1265} Installation of the Water-Cooled Throttle for G3500C and G3500E Generator Set Engines{1265}
2011/02/09 New Software is Now Used for C9 Industrial Engines {1901, 1902, 1920}
2010/12/20 Make Sure that the Radiator Fan for the 3500 Generator Set Engine Operates at the Correct Speed {1356, 1360}