Air Shutoff
Show/hide table
| |
| Illustration 1 | g02360888 |
|
Front view (typical example) | |
(1) Apply 5P-3413 Pipe Sealant to the threads of the elbow before assembly.
(2) Switch Assembly
- Torque ...
16 N·m (12 lb ft)
Lubricate the switch assembly threads with 4C-5598 High Temperature Anti-Seize.
(3) Cap Screw ...
Show/hide table
| |
| Illustration 2 | g02360890 |
|
Top view (typical example) | |
(4) O-Ring Seal
Lubricate the elbow O-ring seal lightly, with Glycerin or approved equivalent.
(5) O-Ring Seal
Lubricate the connector O-ring seal lightly, with Glycerin or approved equivalent.
Show/hide table
| |
| Illustration 3 | g02360976 |
|
Rear view (typical example) | |
(6) O-Ring Seal
Lubricate the elbow O-ring seal lightly, with Glycerin or approved equivalent.
(7) O-Ring Seal
Lubricate the elbow O-ring seal lightly, with Glycerin or approved equivalent.
(8) O-Ring Seal
Lubricate the elbow O-ring seal lightly, with Glycerin or approved equivalent.
Caterpillar Information System:
3116 and 3126 Marine Engines Fuel System Water Separator - Check/Drain
C9 On-highway Engines Engine Valve Lash - Check
C3.4B Engines for Caterpillar Built Machines Air Inlet and Exhaust System - Inspect
C9 On-highway Engines Engine Air Cleaner Element (Single Element) - Inspect/Clean/Replace
C3.4B Engines for Caterpillar Built Machines Gear Group (Front) - Time
C3.4B Engines for Caterpillar Built Machines Clean Emissions Module
C15 and C18 Petroleum Generator Sets Coolant Sample (Level 2) - Obtain
C3.4B Engines for Caterpillar Built Machines Cooling System
C15 and C18 Petroleum Generator Sets Coolant Sample (Level 1) - Obtain
CG137-08 and CG137-12 Industrial Engines Oil Temperature Is High
C3.4B Engines for Caterpillar Built Machines Electrical System
C3.4B Engines for Caterpillar Built Machines Cooling System - Test
C-12 Engine Product Description
C-12 Engine Plate Locations and Film Locations
C175 Generator Sets Engine Oil Sample - Obtain
2010/12/23 New Colors for the Injector Seals for C175-16 Generator Set Engines {1251, 1254, 1290, 1713, 7555}
C-12 Engine Configuration Parameters
C-12 Engine Air Compressor - Check
Procedure to Use a Machine Electronic Control Module (ECM) for Machine Testing{7610} Procedure to Use a Machine Electronic Control Module (ECM) for Machine Testing{7610}
2011/01/12 An Improved Procedure for Using an ECM for a Machine Test Is Now Available {7610}
Reusability Recommendations for Duo-Cone Seals {7555, 7561} Reusability Recommendations for Duo-Cone Seals {7555, 7561}
120M Series 2, 12M Series 2, 140M Series 2 and 160M Series 2 Motor Graders All Wheel Drive Power Train Control Manifold (All Wheel Drive)
C-12 Engine Belt Tensioner - Check
C-12 Engine Belts - Inspect/Adjust/Replace