120M Series 2, 12M Series 2, 140M Series 2 and 160M Series 2 Motor Graders All Wheel Drive Power Train Caterpillar


Control Manifold (All Wheel Drive)

Usage:

12M 2 F9B


Illustration 1g03595718

Table 1
Specification for 357-3345 Control Manifold Gp 
Item  Qty  Part  Specification Description 
251-7509 Shuttle Valve Gp  Torque to 35 ± 1 N·m (26 ± 1 lb ft)
243-5015 Solenoid Valve Gp  Torque to 44.0 ± 3.4 N·m (32.5 ± 2.5 lb ft)
341-9213 Solenoid Valve Gp  Torque to 35 ± 3 N·m (26 ± 2 lb ft)
Nut  Torque to 6.1 ± 0.7 N·m (54.0 ± 6.2 lb in)

Caterpillar Information System:

Reusability Recommendations for Duo-Cone Seals {7555, 7561} Reusability Recommendations for Duo-Cone Seals {7555, 7561}
2011/01/12 An Improved Procedure for Using an ECM for a Machine Test Is Now Available {7610}
Procedure to Use a Machine Electronic Control Module (ECM) for Machine Testing{7610} Procedure to Use a Machine Electronic Control Module (ECM) for Machine Testing{7610}
C-12 Engine Air Compressor - Check
C-12 Engine Configuration Parameters
2010/12/23 New Colors for the Injector Seals for C175-16 Generator Set Engines {1251, 1254, 1290, 1713, 7555}
C175 Generator Sets Engine Oil Sample - Obtain
C-12 Engine Plate Locations and Film Locations
C-12 Engine Product Description
3512B Oil Well Servicing Engines Air Shutoff
3116 and 3126 Marine Engines Fuel System Water Separator - Check/Drain
C9 On-highway Engines Engine Valve Lash - Check
C-12 Engine Belt Tensioner - Check
C-12 Engine Belts - Inspect/Adjust/Replace
UPSB220 Uninterruptible Power Supply Logged Events
UPSB220 Uninterruptible Power Supply Measurement System
UPSB220 Uninterruptible Power Supply Statistics
UPSB220 Uninterruptible Power Supply Time and Date Adjustment
2010/12/23 The Adapter for the High Pressure Fuel Rail Pressure Sensor Is Not Serviced for C175-16 Generator Set Engines {127A, 1718}
C15 and C18 Petroleum Generator Sets Coolant Temperature Regulator - Replace
C-12 Engine Engine Valve Lash - Check
C-12 Engine Fuel Injector - Inspect/Adjust
Installation of the Water-Cooled Throttle for G3500C and G3500E Generator Set Engines{1265} Installation of the Water-Cooled Throttle for G3500C and G3500E Generator Set Engines{1265}
2011/02/09 New Software is Now Used for C9 Industrial Engines {1901, 1902, 1920}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.