2011/01/12 Caterpillar

Articulated Truck:

725 (S/N: B1L1-UP; AFX1-UP)

730 (S/N: AGF1-UP; B1M1-UP)

730 EJECTOR (S/N: B1W1-UP)

735 (S/N: B1N1-UP; AWR1-UP)

740 (S/N: AXM1-UP; B1P1-UP)

740 EJECTOR (S/N: B1R1-UP; AZZ1-UP)

Backhoe Loader:

420E (S/N: HLS1-UP; KMW1-UP)

432E (S/N: BXE1-UP)

Excavator:

M313D (S/N: W3H1-UP)

M315D (S/N: W5M1-UP)

M318D MH (S/N: W8R1-UP)

Integrated Toolcarrier:

IT62H (S/N: M5G1-UP)

Motor Grader:

120M (S/N: B9C1-UP)

12M (S/N: B9F1-UP; B9R1-UP)

140M (S/N: B9D1-UP; B9M1-UP)

14M (S/N: B9J1-UP)

On-Highway Transmission:

CX31 (S/N: B3X1-UP)

Off-Highway Truck/Tractor:

773F (S/N: EED1-UP)

777F (S/N: JRP1-UP)

Quarry Truck:

775F (S/N: DLS1-UP)

Petroleum Transmission:

TH48-E80 (S/N: FRT1-UP)

Pipelayer:

572RSeries II (S/N: DSC1-UP)

583T (S/N: CMX1-UP)

587T (S/N: FAT1-UP)

Multi Terrain Loader:

277C (S/N: JWF1-UP)

287C (S/N: MAS1-UP)

297C (S/N: GCP1-UP)

Skid Steer Loader:

246C (S/N: JAY1-UP)

262C (S/N: MST1-UP)

272C (S/N: RED1-UP)

Telehandler:

TH220B (S/N: SLA1-UP)

TH330B (S/N: SLB1-UP)

TH350B (S/N: SLD1-UP)

TH360B (S/N: SLE1-UP)

TH460B (S/N: SLF1-UP)

TH560B (S/N: SLG1-UP)

TH580B (S/N: SLH1-UP)

Track-Type Loader:

953D (S/N: LBP1-UP)

963D (S/N: LCS1-UP)

Track-Type Tractor:

D10T (S/N: RJG1-UP)

D11T (S/N: GEB1-UP; TPB1-UP)

D3G LGP (S/N: BYR1-UP)

D4G XL (S/N: HYD1-UP)

D4K XL (S/N: MMM1-UP)

D5G XL (S/N: WGB1-UP)

D5G LGP (S/N: RKG1-UP)

D6K LGP (S/N: DHA1-UP)

D6K (S/N: NCF1-UP)

D6K XL (S/N: HMG1-UP; FBH1-UP)

D6RSeries III (S/N: GJB1-UP; WCB1-UP; HDC1-UP)

D6RSeries III XL (S/N: RFC1-UP)

D6RSeries III (S/N: TBC1-UP; HCD1-UP; HKE1-UP; WRG1-UP)

D6RSeries III XW (S/N: MTJ1-UP)

D6RSeries III (S/N: DMK1-UP; JEK1-UP; EXL1-UP; JDL1-UP)

D6RSeries III LGP (S/N: DLM1-UP)

D6RSeries III (S/N: LFM1-UP; LGP1-UP; DPS1-UP; GMT1-UP; MRT1-UP; EXW1-UP)

D6T STD (S/N: JHB1-UP)

D6T PAT (S/N: ZEB1-UP)

D6T STD (S/N: SMC1-UP)

D6T PAT (S/N: JWD1-UP)

D6T XL (S/N: LBD1-UP; LAE1-UP)

D6T XW VPAT (S/N: DJG1-UP)

D6T LGP VPAT (S/N: WCG1-UP)

D6T XL VPAT (S/N: WFH1-UP)

D6T LGP (S/N: LKJ1-UP; SNK1-UP; KJL1-UP)

D6T XW (S/N: SKL1-UP)

D6T XL (S/N: GCT1-UP)

D6T PAT (S/N: RLW1-UP)

D6T XL (S/N: LAY1-UP)

D6T STD (S/N: PEZ1-UP)

D7RSeries II STD (S/N: AEC1-UP)

D7RSeries II DS LGP (S/N: ABJ1-UP)

D7RSeries II DS XR (S/N: AGN1-UP)

D8T (S/N: J8B1-UP; KPZ1-UP)

D9T (S/N: RJS1-UP)

Wheel Loader:

924G (S/N: DDA1-UP; RBB1-UP; WMB1-UP)

924GZ (S/N: RTA1-UP)

928G (S/N: DJD1-UP; WLG1-UP)

930G (S/N: TWR1-UP; TFW1-UP)

930H (S/N: DHC1-UP)

938H (S/N: JKM1-UP)

950H (S/N: N1A1-UP; M1G1-UP; J5J1-UP; K5K1-UP)

966H (S/N: A6D1-UP; A6G1-UP; A6J1-UP)

972H (S/N: A7D1-UP; A7G1-UP)

Wheel Skidder:

525C (S/N: 5251-UP)

545C (S/N: 5451-UP)

Service Magazine SEPD1226, 12 January 2011, "An Improved Procedure for Using an ECM for a Machine Test Is Now Available". Disregard the existing article. Refer to the following information.

ReferenceRefer to Special Instruction, REHS5542, "Procedure to Use a Machine Electronic Control Module (ECM) for Machine Testing".

A procedure has been released to allow reusing the machine ECM for troubleshooting problems. Refer the above reference for the detailed instructions when using an ECM for a machine test procedure and verify that the latest version of machine software for the system to be tested is installed.

This procedure is adaptable to the machines that are listed above.

The Special Instruction is available through the normal literature distribution system. The publication can also be found on the Caterpillar Service Information System (SIS).