The Adapter for the High Pressure Fuel Rail Pressure Sensor Is Not Serviced for C175-16 Generator Set Engines {127A, 1718}
- Generator Set:
- C175-16 (S/N: WYB1-UP)
The adapter for the 287-1866 Pressure Sensor Gp on the high-pressure fuel rail is not serviceable.
The adapter for the fuel pressure sensor has never been intended for removal. Removal of the adapter can increase the tendency for a leak from the fuel rail to occur.
The original adapter has a standard hex geometry that enabled removal with standard tools. A new adapter has three flats in order to discourage removal.
Show/hide table
 | |
| Illustration 1 | g02362677 |
(1) New adapter (2) Original adapter | |
Caterpillar Information System:
UPSB220 Uninterruptible Power Supply Time and Date Adjustment
UPSB220 Uninterruptible Power Supply Statistics
UPSB220 Uninterruptible Power Supply Measurement System
UPSB220 Uninterruptible Power Supply Logged Events
C-12 Engine Belts - Inspect/Adjust/Replace
C-12 Engine Belt Tensioner - Check
120M Series 2, 12M Series 2, 140M Series 2 and 160M Series 2 Motor Graders All Wheel Drive Power Train Control Manifold (All Wheel Drive)
Reusability Recommendations for Duo-Cone Seals {7555, 7561} Reusability Recommendations for Duo-Cone Seals {7555, 7561}
2011/01/12 An Improved Procedure for Using an ECM for a Machine Test Is Now Available {7610}
Procedure to Use a Machine Electronic Control Module (ECM) for Machine Testing{7610} Procedure to Use a Machine Electronic Control Module (ECM) for Machine Testing{7610}
C-12 Engine Air Compressor - Check
C-12 Engine Configuration Parameters
C15 and C18 Petroleum Generator Sets Coolant Temperature Regulator - Replace
C-12 Engine Engine Valve Lash - Check
C-12 Engine Fuel Injector - Inspect/Adjust
Installation of the Water-Cooled Throttle for G3500C and G3500E Generator Set Engines{1265} Installation of the Water-Cooled Throttle for G3500C and G3500E Generator Set Engines{1265}
2011/02/09 New Software is Now Used for C9 Industrial Engines {1901, 1902, 1920}
2010/12/20 Make Sure that the Radiator Fan for the 3500 Generator Set Engine Operates at the Correct Speed {1356, 1360}
C7 Engines for Combat and Tactical Vehicles Product Description
Idler Weld Rebuild Procedure {0679, 0729, 4150, 4159} Idler Weld Rebuild Procedure {0679, 0729, 4150, 4159}
C3.4B Engines for Caterpillar Built Machines Cleanliness of Fuel System Components
CG137-08 and CG137-12 Industrial Engines Coolant Temperature Is Low
UPSB220 Uninterruptible Power Supply Alarm Operation
C7 Engines for Combat and Tactical Vehicles Plate Locations and Film Locations