2010/09/17 Caterpillar


A New Support Bracket Is Used for the Air Inlet Housing on 3616 and C280-16 Engines {1052, 1071}

Usage:

3616 1FN
Engine:
3616 (S/N: 1PD1-UP)
3616 (S/N: 1FN1-UP)
Marine Engine:
C280-16 (S/N: NKB1-UP; TDX1-UP)

Description of Change: The new one-piece bracket is more rugged than the combination of two brackets that was previously used. The new bracket is better able to withstand the torsional stress that is generated by the turbocharger.

Adaptable To: 335-6318 Bracket As is a one-piece replacement for the former two-pieces 200-6365 Bracket As and 227-4042 Bracket As, which are canceled.

Effectivity is listed in Table 1

Table 1
Effectivity for the 335-6318 Bracket As    
S/N:1FN00158    
S/N:1PD00659    
S/N:ZYD00102    
S/N:NKB00189    
S/N:TDX00158    

Caterpillar Information System:

Machine Security System Emerging Symptom Information
Machine Security System Symptom Troubleshooting
G3500 Engines Camshaft Timing
C27 Generator Set Safety Messages
Track Roller Oil Fill Volume {0645, 4180, 7500, 7579} Track Roller Oil Fill Volume {0645, 4180, 7500, 7579}
3512B, 3512C, and 3516B Generator Set Engines with Dynamic Gas Blending Jacket Water Cooling Circuit
390F Excavator Machine System Bucket Cylinder Lines
Installation of the 346-1467 Mounting Kit for the G3500C and G3500E Throttle and Actuator Control {1265, 1803, 5510} Installation of the 346-1467 Mounting Kit for the G3500C and G3500E Throttle and Actuator Control {1265, 1803, 5510}
G3406 and G3412 Generator Sets Configuration Parameters
C27 and C32 Engines for Caterpillar Built Machines Water Temperature Regulator Housing - Remove and Install
2010/11/15 A New Kit Is Available for Isolation Mounting of the Electronic Portion of the Throttle Actuator and Bypass Actuator for G3500C and G3500E Engines {1265, 1803, 5510}
3512B Generator Set Engine Crankshaft - Install
C32 Petroleum Generator Sets Overhaul Considerations
C32 Petroleum Generator Sets Electronic Modular Control Panel 3 (EMCP 3)
C27 Generator Set Model View Illustrations
C18 Marine Generator Set Engine Electronics
C32 Petroleum Generator Sets Fluid Recommendations
C18 Marine Generator Set After Starting Engine
C7.1 Industrial Engine and Generator Set Sensor Calibration Required - Test
3126B and 3126E On-highway Engines 0102-02 Boost Pressure signal erratic
C32 Marine Generator Set Generator Operation
C32 Marine Generator Set Parallel Operation
C27 Generator Set Product Description
C18 Marine Engine Generator Bearing - Lubricate
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.