A New Kit Is Available for Isolation Mounting of the Electronic Portion of the Throttle Actuator and Bypass Actuator for G3500C and G3500E Engines {1265, 1803, 5510}
- Engine:
- G3512E (S/N: SSR1-UP)
- G3516C (S/N: GSB1-UP; TJB1-UP; TJC1-UP; GZZ1-UP)
- G3516E (S/N: GAS1-UP; SLY1-UP)
- G3520C (S/N: GZB1-UP; MAD1-UP; GZJ1-UP; GZL1-UP; GZM1-UP; GZN1-UP; B9P1-UP; RLP1-UP; LGS1-UP; HAT1-UP; CWW1-UP; CWY1-UP)
- G3520E (S/N: GZG1-UP; GZH1-UP)
ReferenceSpecial Instruction, REHS4743, "Installation of the 346-1467 Mounting Kit "
Over time, the O-rings that help isolate the electronic portions of the actuators are deteriorated by high temperatures. The deterioration of the O-rings enable vibration to affect the performance of the actuators.
The new 346-1467 Mounting Kit is available for replacement of the mounting hardware for the electronic portions of the actuators. The kit is for use with the following components:
For installation instructions, refer to the Special Instruction that is referenced above.
Caterpillar Information System:
3512B Generator Set Engine Crankshaft - Install
3512B Generator Set Engine Crankshaft - Remove
120 Motor Graders Check Valve (Secondary Steering)
3512B Generator Set Engine Camshaft - Install
3512B Generator Set Engine Camshaft - Remove
3512B Generator Set Engine Aftercooler - Remove and Install
C4.4 Industrial Engine Monitoring System
C7.1 Industrial Engine and Generator Set Injector Solenoid Circuit - Test
C6.6 Industrial Engine Safety Messages
2010/08/23 An Improved Valve Cover Is Available for Certain C9 Engines {1107, 1120}
2010/07/21 An Improved Valve Cover Is Available for Certain C9 Engines {1107}
C7.1 Industrial Engine and Generator Set Injector Data Incorrect - Test
C27 and C32 Engines for Caterpillar Built Machines Water Temperature Regulator Housing - Remove and Install
G3406 and G3412 Generator Sets Configuration Parameters
Installation of the 346-1467 Mounting Kit for the G3500C and G3500E Throttle and Actuator Control {1265, 1803, 5510} Installation of the 346-1467 Mounting Kit for the G3500C and G3500E Throttle and Actuator Control {1265, 1803, 5510}
390F Excavator Machine System Bucket Cylinder Lines
3512B, 3512C, and 3516B Generator Set Engines with Dynamic Gas Blending Jacket Water Cooling Circuit
Track Roller Oil Fill Volume {0645, 4180, 7500, 7579} Track Roller Oil Fill Volume {0645, 4180, 7500, 7579}
C27 Generator Set Safety Messages
G3500 Engines Camshaft Timing
Machine Security System Symptom Troubleshooting
Machine Security System Emerging Symptom Information
2010/09/17 A New Support Bracket Is Used for the Air Inlet Housing on 3616 and C280-16 Engines {1052, 1071}
C32 Petroleum Generator Sets Overhaul Considerations