C27 and C32 Engines for Caterpillar Built Machines Caterpillar


Water Temperature Regulator Housing - Remove and Install

Usage:

826K 2L3

拆卸步骤

表 1
所需工具    
工具     零件号     零件描述     数量    
A     221-8647     密封件安装工具总成     1    
B     207-1600 (1)     橡胶润滑剂     1    
207-1601 橡胶润滑剂     1    
( 1 ) 用于 EAME

  1. 有关正确的排放和加注步骤,参考操作和保养手册, "冷却液 - 更换"。



    图 1g02734936

  1. 拆下管组件 (2) ,然后拆下 O 形密封圈 (3) 。

    注: 拆下管组件 (2) 和水泵盖之间的 O 形密封圈。

  1. 拆下水温调节器壳体 (1) 。



    图 2g02734998

    注: 记下唇形密封的方向,以便于安装。

  1. 拆下唇形密封 (4) 、水温调节器 (5) 和唇形密封 (6) 。 对其他水温调节器重复此步骤。

安装步骤

  1. 按与拆卸相反的顺序安装水温调节器壳体 (5) 。

    1. 使用工具 (A) 安装唇形密封。

    1. 将工具 (B) 涂抹到 O 形密封圈 (3) 上。

Caterpillar Information System:

2010/11/15 A New Kit Is Available for Isolation Mounting of the Electronic Portion of the Throttle Actuator and Bypass Actuator for G3500C and G3500E Engines {1265, 1803, 5510}
3512B Generator Set Engine Crankshaft - Install
3512B Generator Set Engine Crankshaft - Remove
120 Motor Graders Check Valve (Secondary Steering)
3512B Generator Set Engine Camshaft - Install
3512B Generator Set Engine Camshaft - Remove
3512B Generator Set Engine Aftercooler - Remove and Install
C4.4 Industrial Engine Monitoring System
C7.1 Industrial Engine and Generator Set Injector Solenoid Circuit - Test
C6.6 Industrial Engine Safety Messages
2010/08/23 An Improved Valve Cover Is Available for Certain C9 Engines {1107, 1120}
2010/07/21 An Improved Valve Cover Is Available for Certain C9 Engines {1107}
G3406 and G3412 Generator Sets Configuration Parameters
Installation of the 346-1467 Mounting Kit for the G3500C and G3500E Throttle and Actuator Control {1265, 1803, 5510} Installation of the 346-1467 Mounting Kit for the G3500C and G3500E Throttle and Actuator Control {1265, 1803, 5510}
390F Excavator Machine System Bucket Cylinder Lines
3512B, 3512C, and 3516B Generator Set Engines with Dynamic Gas Blending Jacket Water Cooling Circuit
Track Roller Oil Fill Volume {0645, 4180, 7500, 7579} Track Roller Oil Fill Volume {0645, 4180, 7500, 7579}
C27 Generator Set Safety Messages
G3500 Engines Camshaft Timing
Machine Security System Symptom Troubleshooting
Machine Security System Emerging Symptom Information
2010/09/17 A New Support Bracket Is Used for the Air Inlet Housing on 3616 and C280-16 Engines {1052, 1071}
C32 Petroleum Generator Sets Overhaul Considerations
C32 Petroleum Generator Sets Electronic Modular Control Panel 3 (EMCP 3)
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.