120 Motor Graders Caterpillar


Check Valve (Secondary Steering)

Usage:

120 E94



Illustration 1g02723119

Table 1
Specification for 348-1107 Check Valve Gp    
Item     Qty     Part     Specification Description    
1     1     348-1107 Check Valve Gp     Torque to 72 ± 3 N·m (53 ± 2 lb ft).    
-     -     -     Cracking pressure is
34.5 kPa (5.0 psi).    
-     -     -     Maximum operating pressure is
35000 kPa (5076 psi).    

Caterpillar Information System:

3512B Generator Set Engine Camshaft - Install
3512B Generator Set Engine Camshaft - Remove
3512B Generator Set Engine Aftercooler - Remove and Install
C4.4 Industrial Engine Monitoring System
C7.1 Industrial Engine and Generator Set Injector Solenoid Circuit - Test
C6.6 Industrial Engine Safety Messages
2010/08/23 An Improved Valve Cover Is Available for Certain C9 Engines {1107, 1120}
2010/07/21 An Improved Valve Cover Is Available for Certain C9 Engines {1107}
C7.1 Industrial Engine and Generator Set Injector Data Incorrect - Test
C9.3 Engines for Caterpillar Built Machines Exhaust Has Excessive Black Smoke
2010/07/30 New Starting Motor for C3.3, 3054C, 3054E, C4.4, C4.4 (Mech), 3056, 3056E and C6.6 Engines {1453}
2010/07/28 New Starting Motor for C3.3, 3054C, 3054E, C4.4, C4.4 (Mech), 3056, 3056E and C6.6 Certain Machine Engines {1453}
3512B Generator Set Engine Crankshaft - Remove
3512B Generator Set Engine Crankshaft - Install
2010/11/15 A New Kit Is Available for Isolation Mounting of the Electronic Portion of the Throttle Actuator and Bypass Actuator for G3500C and G3500E Engines {1265, 1803, 5510}
C27 and C32 Engines for Caterpillar Built Machines Water Temperature Regulator Housing - Remove and Install
G3406 and G3412 Generator Sets Configuration Parameters
Installation of the 346-1467 Mounting Kit for the G3500C and G3500E Throttle and Actuator Control {1265, 1803, 5510} Installation of the 346-1467 Mounting Kit for the G3500C and G3500E Throttle and Actuator Control {1265, 1803, 5510}
390F Excavator Machine System Bucket Cylinder Lines
3512B, 3512C, and 3516B Generator Set Engines with Dynamic Gas Blending Jacket Water Cooling Circuit
Track Roller Oil Fill Volume {0645, 4180, 7500, 7579} Track Roller Oil Fill Volume {0645, 4180, 7500, 7579}
C27 Generator Set Safety Messages
G3500 Engines Camshaft Timing
Machine Security System Symptom Troubleshooting
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.