Bucket Cylinder Lines
Show/hide table
Illustration 1 | g03651644 |
Typical example |
Show/hide table
Specification for 361-2897 Bucket Cylinder Lines Gp, 361-3323 Bucket Cylinder Lines Gp, and 503-8788 Bucket Cylinder Lines Gp | |||
Item | Qty | Part | Specification Description |
1 | - | 457-5821 Bolt | Torque to |
B | - | - | Orient the support assemblies to the angle of 30 degrees. |
C | - | - | Distance from the centerline of the mounting pin to the support assemblies is Distance from the centerline of the mounting pin to the support assemblies is |
Show/hide table
(1) | For the part numbers 361-2897 and 503-8788 |
(2) | For the part number 361-3323 |
Caterpillar Information System:
Installation of the 346-1467 Mounting Kit for the G3500C and G3500E Throttle and Actuator Control {1265, 1803, 5510} Installation of the 346-1467 Mounting Kit for the G3500C and G3500E Throttle and Actuator Control {1265, 1803, 5510}
G3406 and G3412 Generator Sets Configuration Parameters
C27 and C32 Engines for Caterpillar Built Machines Water Temperature Regulator Housing - Remove and Install
2010/11/15 A New Kit Is Available for Isolation Mounting of the Electronic Portion of the Throttle Actuator and Bypass Actuator for G3500C and G3500E Engines {1265, 1803, 5510}
3512B Generator Set Engine Crankshaft - Install
3512B Generator Set Engine Crankshaft - Remove
120 Motor Graders Check Valve (Secondary Steering)
3512B Generator Set Engine Camshaft - Install
3512B Generator Set Engine Camshaft - Remove
3512B Generator Set Engine Aftercooler - Remove and Install
C4.4 Industrial Engine Monitoring System
C7.1 Industrial Engine and Generator Set Injector Solenoid Circuit - Test
3512B, 3512C, and 3516B Generator Set Engines with Dynamic Gas Blending Jacket Water Cooling Circuit
Track Roller Oil Fill Volume {0645, 4180, 7500, 7579} Track Roller Oil Fill Volume {0645, 4180, 7500, 7579}
C27 Generator Set Safety Messages
G3500 Engines Camshaft Timing
Machine Security System Symptom Troubleshooting
Machine Security System Emerging Symptom Information
2010/09/17 A New Support Bracket Is Used for the Air Inlet Housing on 3616 and C280-16 Engines {1052, 1071}
C32 Petroleum Generator Sets Overhaul Considerations
C32 Petroleum Generator Sets Electronic Modular Control Panel 3 (EMCP 3)
C27 Generator Set Model View Illustrations
C18 Marine Generator Set Engine Electronics
C32 Petroleum Generator Sets Fluid Recommendations