Inlet Manifold - Remove and Install
拆卸步骤
Show/hide table
所需工具     | |||
---|---|---|---|
工具     | 零件号     | 零件描述     | 数量     |
A.     | −     | Loctite 密封胶 − 密封垫     | 1     |
开始:
- 拆下烟气处理总成。
- 拆下废气旁通阀电磁阀。
- 拆下螺母 (1) 。 拆下电缆扎带 (2) ,然后断开线束组件 (3) 。 拆下卡箍 (4) 。
Show/hide table
图 1 | g02150327 |
- 拆下螺栓 (5) ,然后拆下进气歧管 (6) 。
Show/hide table
图 2 | g02150381 |
- 拆下卡箍 (7) 。 拆下螺栓 (8) 和螺栓 (9) 。 从弯头 (11) 上分开进气歧管 (6) 。 从弯头 (11) 上分开管组件 (10) 。
Show/hide table
图 3 | g02150389 |
- 拆下 O 形密封圈 (12) 、波形圈 (13) 和管 (14) 。
Show/hide table
图 4 | g02150420 |
安装步骤
- 按照与拆卸相反的顺序安装进气歧管 (6) 。
- 将工具 (A) 均匀地涂抹到进气歧管 (6) 的表面上并在涂抹后的 10 分钟内进行组装。
Caterpillar Information System:
Improved Jacket Water Circuit Breaker for Certain Electric Power Generators and Work Tools{1383, 1417, 1420} Improved Jacket Water Circuit Breaker for Certain Electric Power Generators and Work Tools{1383, 1417, 1420}
Improved Jacket Water Circuit Breaker for Certain Electric Power Generators{1383, 1417, 1420} Improved Jacket Water Circuit Breaker for Certain Electric Power Generators{1383, 1417, 1420}
G3520E Generator Set Engines Water Lines
G3520E Generator Set Engines Water Lines
2010/09/22 New Engine Speed Sensors Are Now Used On Certain Generator Sets {1907}
797F and 797F XQ Off-Highway Trucks Machine Systems Steering Cylinder - Remove and Install
C13 Industrial Engines Electric Starting Motor
C9.3 Engines for Caterpillar Built Machines Engine Oil Filter Base - Remove and Install
G3512E and G3520E Generator Set Engines Engine Governing
C27 Petroleum Engine Product Lifting
C27 Petroleum Engine Plate Locations and Film Locations
C27 Petroleum Engine Safety Messages
C13 Tier 4 Final Engines Exhaust Cooler (NRS) - Clean
2010/05/06 Improved Remanufactured Injectors Are Now Used on Some 3408E and 3412E Industrial Engines {1251, 1254, 1290, 1713}
C15 and C18 Tier 4 Final Engines Exhaust Cooler (NRS) - Test
2010/04/30 A New Fuse Is Now Used In Jacket Water Heater Circuit On Certain C6.6 Generator Sets {1383, 1417}
2010/06/25 A New Fuse Is Now Used In Jacket Water Heater Circuit On Certain Generator Sets {1383, 1417}
C6.6 Industrial Engine Vibration Damper and Pulley - Remove
C6.6 Industrial Engine Vibration Damper and Pulley - Install
C4.4 Industrial Engine Engine Oil Pump
C6.6 Industrial Engine Crankshaft Front Seal - Remove and Install
C6.6 Industrial Engine Crankshaft Front Seal - Remove and Install - Crankshaft Front Seal for Heavy Duty Front Cover
C4.4 Industrial Engine Exhaust Manifold
C6.6 Industrial Engine Gear Group (Front) - Remove and Install