Crankshaft Front Seal - Remove and Install - Crankshaft Front Seal for Heavy Duty Front Cover
拆卸步骤
Show/hide table
| 所需工具 | |||
| 工具 | 零件号 | 零件描述 | 数量 |
| A | 278-2636 | 前油封拆卸工具 | 1 |
开始:
- 拆下曲轴皮带轮。 请参阅拆解和组装, "减振器和皮带轮 - 拆卸"以了解正确步骤。
Show/hide table
| 注意 |
|---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 将工具 (A) 安置在曲轴的鼻端。 将工具 (A) 拧入曲轴前油封 (2) 。
注: 切勿损坏曲轴前油封的前盖边缘。
Show/hide table
 | |
| 图 1 | g02048634 |
- 将螺栓拧入工具 (A) ，以便将曲轴前油封 (2) 从前盖 (1) 上拆下。
安装步骤
Show/hide table
| 所需工具 | |||
| 工具 | 零件号 | 零件描述 | 数量 |
| B | 9U-6206 | 双头螺柱 | 1 |
| 370-4656 | 锚定板 | 1 | |
| 9U-6209 | 套筒 | 1 | |
| 276-1209 | 油封安装工具 | 1 | |
| 9U-6207 | 板 | 1 | |
Show/hide table
| 注意 |
|---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 确保前盖中的曲轴前油封孔清洁、无损坏。
- 组装工具 (B) 。
Show/hide table
 | |
| 图 2 | g02048635 |
- 将新的曲轴前油封 (2) 正确定位到前盖 (1) 上。
注: 如果随曲轴前油封提供了套筒，安装之前，将套筒从曲轴前油封上拆下。
- 用工具 (B) 将曲轴前油封 (2) 安装到前盖 (1) 上。 确保曲轴前油封正面安装深度为 6.5 ± 0.2 mm (0.256 ± 0.008 in)。
- 将工具 (B) 从曲轴上卸下。
End By: 安装曲轴皮带轮。 请参阅 拆解和组装, "减振器和皮带轮 - 安装"，以了解正确的步骤。。
Caterpillar Information System:
C6.6 Industrial Engine Crankshaft Front Seal - Remove and Install
C4.4 Industrial Engine Engine Oil Pump
C6.6 Industrial Engine Vibration Damper and Pulley - Install
C6.6 Industrial Engine Vibration Damper and Pulley - Remove
2010/06/25 A New Fuse Is Now Used In Jacket Water Heater Circuit On Certain Generator Sets {1383, 1417}
2010/04/30 A New Fuse Is Now Used In Jacket Water Heater Circuit On Certain C6.6 Generator Sets {1383, 1417}
C15 and C18 Tier 4 Final Engines Exhaust Cooler (NRS) - Test
2010/05/06 Improved Remanufactured Injectors Are Now Used on Some 3408E and 3412E Industrial Engines {1251, 1254, 1290, 1713}
C13 Tier 4 Final Engines Exhaust Cooler (NRS) - Clean
C9.3 Engines for Caterpillar Built Machines Inlet Manifold - Remove and Install
Improved Jacket Water Circuit Breaker for Certain Electric Power Generators and Work Tools{1383, 1417, 1420} Improved Jacket Water Circuit Breaker for Certain Electric Power Generators and Work Tools{1383, 1417, 1420}
Improved Jacket Water Circuit Breaker for Certain Electric Power Generators{1383, 1417, 1420} Improved Jacket Water Circuit Breaker for Certain Electric Power Generators{1383, 1417, 1420}
C4.4 Industrial Engine Exhaust Manifold
C6.6 Industrial Engine Gear Group (Front) - Remove and Install
C4.4 Industrial Engine Engine Oil Filter Base
C6.6 Industrial Engine Gear Group (Front) - Remove and Install - Heavy Duty Gear Group (Front)
C6.6 Industrial Engine Idler Gear - Remove
C6.6 Industrial Engine Idler Gear - Install
C6.6 Industrial Engine Housing (Front) - Remove
C7 On-highway Engine Maintenance Interval Schedule - Engines with a Shallow Oil Sump
C6.6 Industrial Engine Housing (Front) - Remove - Heavy Duty Housing (Front)
C4.4 Industrial Engine Engine Oil Cooler
C6.6 Industrial Engine Housing (Front) - Install
C7 On-highway Engine Maintenance Interval Schedule - Engines with a Deep Oil Sump