G3520E Generator Set Engines Caterpillar


Water Lines

Usage:

G3520E FZJ


Illustration 1g03278996

Table 1
Specification for 346-1202 Water Lines Gp 
Item  Qty  Part  Specification Description 
6V-1454 O-Ring Seal  Lubricate the bore lightly with 5P-3975 Rubber Lubricant. 
6V-5066 O-Ring Seal  Lubricate the bore lightly with 5P-3975 Rubber Lubricant. 
8T-1919 O-Ring Seal  Lubricate the bore lightly with 5P-3975 Rubber Lubricant. 

Caterpillar Information System:

G3520E Generator Set Engines Water Lines
2010/09/22 New Engine Speed Sensors Are Now Used On Certain Generator Sets {1907}
797F and 797F XQ Off-Highway Trucks Machine Systems Steering Cylinder - Remove and Install
C13 Industrial Engines Electric Starting Motor
C9.3 Engines for Caterpillar Built Machines Engine Oil Filter Base - Remove and Install
G3512E and G3520E Generator Set Engines Engine Governing
C27 Petroleum Engine Product Lifting
C27 Petroleum Engine Plate Locations and Film Locations
C27 Petroleum Engine Safety Messages
C6.6 Industrial Engine Flywheel Housing - Remove and Install - Standard Housing
C27 Petroleum Engine Model View Illustrations
C6.6 Industrial Engine Crankshaft Rear Seal - Install
Improved Jacket Water Circuit Breaker for Certain Electric Power Generators{1383, 1417, 1420} Improved Jacket Water Circuit Breaker for Certain Electric Power Generators{1383, 1417, 1420}
Improved Jacket Water Circuit Breaker for Certain Electric Power Generators and Work Tools{1383, 1417, 1420} Improved Jacket Water Circuit Breaker for Certain Electric Power Generators and Work Tools{1383, 1417, 1420}
C9.3 Engines for Caterpillar Built Machines Inlet Manifold - Remove and Install
C13 Tier 4 Final Engines Exhaust Cooler (NRS) - Clean
2010/05/06 Improved Remanufactured Injectors Are Now Used on Some 3408E and 3412E Industrial Engines {1251, 1254, 1290, 1713}
C15 and C18 Tier 4 Final Engines Exhaust Cooler (NRS) - Test
2010/04/30 A New Fuse Is Now Used In Jacket Water Heater Circuit On Certain C6.6 Generator Sets {1383, 1417}
2010/06/25 A New Fuse Is Now Used In Jacket Water Heater Circuit On Certain Generator Sets {1383, 1417}
C6.6 Industrial Engine Vibration Damper and Pulley - Remove
C6.6 Industrial Engine Vibration Damper and Pulley - Install
C4.4 Industrial Engine Engine Oil Pump
C6.6 Industrial Engine Crankshaft Front Seal - Remove and Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.