2010/09/22 Caterpillar


New Engine Speed Sensors Are Now Used On Certain Generator Sets {1907}

Usage:

C4.4 D4D
Electric Power Generation:
C4.4 GEN SET (S/N: NCD1-UP; XYC1-UP; D4D1-UP; N4D1-UP; XYD1-UP; GLE1-UP; N4R1-UP; N4X1-UP)
C1.5 GEN SET (S/N: GBD1-UP; NCA1-UP)
C2.2 GEN SET (S/N: GBE1-UP; NCB1-UP; XYE1-UP)
C3.3 GEN SET (S/N: X3B1-UP; NCC1-UP; N3X1-UP)
C6.6 GEN SET (S/N: MRW1-UP)

Description of Change: New sensors are now used on the Generator Sets that are listed above. The new sensors have improved signal strength.

Adaptable To: The sensors in Table 1 are adaptable to the Generator Sets that are listed above. Refer to Table 1 for direct replacement information. A Deutsch connector must be added to the harness with the use of the new sensors.




Illustration 1g02150123

Old Sensor




Illustration 2g02150124

New Sensor

Table 1
Speed Sensors    
Original     Replacement    
220-1557 Speed Sensor     116-6680 Speed Sensor    
249-4019 Speed Sensor     357-3053 Speed Sensor Gp    
The sensors are effective with the Generator Sets that are listed in Table 2.

Table 2
Effective Serial Numbers    
Sales Model     Serial Number Range    
C4.4 GEN SET     S/N:NCD1180-UP    
S/N:XYC681-UP
S/N:D4D773-UP
S/N:N4D1200-UP
S/N:XYD646-UP
S/N:GLE772-UP
S/N:N4R403-UP
S/N:N4X480-UP
C1.5 GEN SET     S/N:GBD225-UP    
S/N:NCA429-UP
C2.2 GEN SET     S/N:GBE395-UP    
S/N:NCB601-UP
C3.3 GEN SET     S/N:X3B211-UP    
S/N:NCC165-UP
S/N:N3X378-UP
C6.6 GEN SET     S/N:MRW204-UP    

Caterpillar Information System:

797F and 797F XQ Off-Highway Trucks Machine Systems Steering Cylinder - Remove and Install
C13 Industrial Engines Electric Starting Motor
C9.3 Engines for Caterpillar Built Machines Engine Oil Filter Base - Remove and Install
G3512E and G3520E Generator Set Engines Engine Governing
C27 Petroleum Engine Product Lifting
C27 Petroleum Engine Plate Locations and Film Locations
C27 Petroleum Engine Safety Messages
C6.6 Industrial Engine Flywheel Housing - Remove and Install - Standard Housing
C27 Petroleum Engine Model View Illustrations
C6.6 Industrial Engine Crankshaft Rear Seal - Install
C6.6 Industrial Engine Crankshaft Rear Seal - Remove
C6.6 Industrial Engine Flywheel - Install
G3520E Generator Set Engines Water Lines
G3520E Generator Set Engines Water Lines
Improved Jacket Water Circuit Breaker for Certain Electric Power Generators{1383, 1417, 1420} Improved Jacket Water Circuit Breaker for Certain Electric Power Generators{1383, 1417, 1420}
Improved Jacket Water Circuit Breaker for Certain Electric Power Generators and Work Tools{1383, 1417, 1420} Improved Jacket Water Circuit Breaker for Certain Electric Power Generators and Work Tools{1383, 1417, 1420}
C9.3 Engines for Caterpillar Built Machines Inlet Manifold - Remove and Install
C13 Tier 4 Final Engines Exhaust Cooler (NRS) - Clean
2010/05/06 Improved Remanufactured Injectors Are Now Used on Some 3408E and 3412E Industrial Engines {1251, 1254, 1290, 1713}
C15 and C18 Tier 4 Final Engines Exhaust Cooler (NRS) - Test
2010/04/30 A New Fuse Is Now Used In Jacket Water Heater Circuit On Certain C6.6 Generator Sets {1383, 1417}
2010/06/25 A New Fuse Is Now Used In Jacket Water Heater Circuit On Certain Generator Sets {1383, 1417}
C6.6 Industrial Engine Vibration Damper and Pulley - Remove
C6.6 Industrial Engine Vibration Damper and Pulley - Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.