Automatic Shut-Off Systems Not Recommended On Mobile Earthmoving Equipment {7418,7403}
Usage:
All Caterpillar Earthmoving Equipment
Some stationary engine installations involve the use of an automatic shut-off system. Owners of earthmoving equipment sometimes request that automatic engine shut-off systems be installed on mobile earthmoving machines. Caterpillar Inc. DOES NOT recommend the installation of an automatic engine shut-off on mobile earthmoving equipment. The control of engine shut-down, and engine-related systems, should be at the discretion of the operator.
Systems such as EMS that warn of high temperature, low oil pressure, or other conditions are desirable; but such systems should not include an automatic shutoff circuit.
Caterpillar Information System:
1989/05/15 Recommended Oils For Filling Bearings During Reconditioning of Track Rollers {4154,4180,0645}
1989/05/08 List Of Seal Installation Tools For Duo-Cone Seals {0700,7561}
1989/05/08 Longer Bolts Give More Life To Gaskets Between Water Cooled Aftercooler Housings {1063,1069}
1989/05/08 New Crankshaft Thrust Plate Made Of Brass {1232}
1989/05/08 New Heavy-Duty Air Cleaner Groups Available {1051}
1989/05/01 Use Care When Positioning Turbocharger Compressor Housing {1052,1060}
1989/05/01 Fuel Manifolds Changed To Steel {1252,1702}
1989/05/01 Keys For Power Modules Shipped Inside Air Louver {1021,7263,7315}
1989/05/01 Two Retainers Used To Better Fasten Air Inlet Pipes In Turbocharger Compressors {1058}
1989/05/01 Requirements For Cooling System Conditioner In 3176 Truck Engines {1352,1350}
1989/05/01 Owners Of Digital Diagnostic Tools (DDT) And Electronic Control Analyzer Programmers (ECAP) Must Register Their Service Tools To Automatically Receive The Mailing Of The May 1989 Service Program Module (SPM) Update {1705}
1989/05/01 Procedure For Replacing Batteries, Battery Cables Or Disconnect Switches {1401,1402,1411}
1989/05/15 New Valve Stem Seal Used On Inlet Valves And Added To Exhaust Valves {1105,1108}
1989/05/15 New Head Gasket Used {1124}
1989/05/15 Front Idler And Accessory Drive Gears Improved {1206,1361}
1989/05/15 New Installation Procedure For Unit Injectors {1290}
1989/05/22 Vibration Measurement System For Caterpillar Products {0781,0783,0784}
1989/05/22 Do Not Prefill Secondary Fuel Filter {1261,1290}
1989/05/22 New Front Crankshaft Seal Requires New Installer Tool {1160,1202,0704}
1989/05/22 Check Valve Added To Fuel Injection Lines {1274}
1989/05/22 New Clamps With Grommets Used In Fuel Lines, Turbocharger Oil Supply Lines, And Turbocharger Water Supply Lines {1274,1307,1380}
1989/05/29 New Upper and Lower Seals For Folded Core Radiators In Cold Temperature Applications {1353}
1989/05/29 New Extension Assembly Used In Gas Engine Ignition Groups {1558}
1989/05/29 Maintenance Inspection Of Emergency Shutdown Systems Required Every 1000 Hours {7400}