Recommended Oils For Filling Bearings During Reconditioning of Track Rollers {4154,4180,0645}
Usage:
All Track-Type Machines
Reference: Service Magazine; April 3, 1989; Page 4; "Follow Recommended Procedure When Adding Oil To Track Rollers And Idlers" on all track-type machines.
Reference: Undercarriage Reconditioning Bulletin [MP-11 (1/87)], SEBF8515, "Track Roller, Carrier Roller, and Idler Disassembly and Assembly Procedures."
The following Caterpillar® Oils are recommended for bearings of track rollers during reconditioning on all track-type machines.
Caterpillar Oils (SAE 30): DEO or EO
Other commercial oils (SAE 30) that can also be used are: API CC, CD or CD/TO-2.
Caterpillar Information System:
1989/05/08 List Of Seal Installation Tools For Duo-Cone Seals {0700,7561}
1989/05/08 Longer Bolts Give More Life To Gaskets Between Water Cooled Aftercooler Housings {1063,1069}
1989/05/08 New Crankshaft Thrust Plate Made Of Brass {1232}
1989/05/08 New Heavy-Duty Air Cleaner Groups Available {1051}
1989/05/01 Use Care When Positioning Turbocharger Compressor Housing {1052,1060}
1989/05/01 Fuel Manifolds Changed To Steel {1252,1702}
1989/05/01 Keys For Power Modules Shipped Inside Air Louver {1021,7263,7315}
1989/05/01 Two Retainers Used To Better Fasten Air Inlet Pipes In Turbocharger Compressors {1058}
1989/05/01 Requirements For Cooling System Conditioner In 3176 Truck Engines {1352,1350}
1989/05/01 Owners Of Digital Diagnostic Tools (DDT) And Electronic Control Analyzer Programmers (ECAP) Must Register Their Service Tools To Automatically Receive The Mailing Of The May 1989 Service Program Module (SPM) Update {1705}
1989/05/01 Procedure For Replacing Batteries, Battery Cables Or Disconnect Switches {1401,1402,1411}
1989/05/01 Procedure For Replacing Batteries, Battery Cables Or Disconnect Switches {1401,1402,1411}
1989/05/15 Automatic Shut-Off Systems Not Recommended On Mobile Earthmoving Equipment {7418,7403}
1989/05/15 New Valve Stem Seal Used On Inlet Valves And Added To Exhaust Valves {1105,1108}
1989/05/15 New Head Gasket Used {1124}
1989/05/15 Front Idler And Accessory Drive Gears Improved {1206,1361}
1989/05/15 New Installation Procedure For Unit Injectors {1290}
1989/05/22 Vibration Measurement System For Caterpillar Products {0781,0783,0784}
1989/05/22 Do Not Prefill Secondary Fuel Filter {1261,1290}
1989/05/22 New Front Crankshaft Seal Requires New Installer Tool {1160,1202,0704}
1989/05/22 Check Valve Added To Fuel Injection Lines {1274}
1989/05/22 New Clamps With Grommets Used In Fuel Lines, Turbocharger Oil Supply Lines, And Turbocharger Water Supply Lines {1274,1307,1380}
1989/05/29 New Upper and Lower Seals For Folded Core Radiators In Cold Temperature Applications {1353}
1989/05/29 New Extension Assembly Used In Gas Engine Ignition Groups {1558}