2010/02/03 Caterpillar


A Long Term Storage and Recovery Procedure Is Now Available for Certain Commercial Engines {1000}

Usage:

TK711 101
Agricultural Tractor:
65 (S/N: 4ZF1-UP)
65C (S/N: 4ZF1-UP)
65D (S/N: 4ZF1-UP)
MT735 (S/N: 4ZF1-UP)
MT745 (S/N: 4ZF1-UP)
MT755 (S/N: 4ZF1-UP)
MT765 (S/N: 4ZF1-UP)
MTC735 (S/N: 4ZF1-UP)
MTC745 (S/N: 4ZF1-UP)
MTC755 (S/N: 4ZF1-UP)
MTC765 (S/N: 4ZF1-UP)
Combine:
Lexion 470 R (S/N: 4ZF1-UP)
Lexion 475 R (S/N: 4ZF1-UP)
Engine:
3126 (S/N: CKK1-UP; 9ZR1-UP)
3126B (S/N: BEJ1-UP; DCS1-UP)
C-10 (S/N: BCX1-UP)
C-12 (S/N: BDL1-UP)
C-9 (S/N: CLJ1-UP)
C13 (S/N: KWJ1-UP)
C15 (S/N: LDN1-UP; RKS1-UP)
C18 (S/N: RRC1-UP; EJG1-UP; BDN1-UP)
C7 (S/N: JRA1-UP; JTF1-UP; C7P1-UP; C7T1-UP)
Industrial Engine:
3126B PETROLEUM (S/N: Z2A1-UP)
3406B IND (S/N: 6TB1-UP)
3406C IND (S/N: 3ER1-UP)
C-10 PETROLEUM (S/N: Z2B1-UP)
C-15 IND (S/N: BEM1-UP)
C-16 IND (S/N: BFM1-UP)
C11 INDUSTRIAL (S/N: GLS1-UP)
C13 INDUSTRIAL (S/N: LGK1-UP)
C15 IND (S/N: JRE1-UP)
C15 INDUSTRIAL (S/N: JAS1-UP)
C18 INDUSTRIAL (S/N: JDA1-UP; NBB1-UP; WJH1-UP)
C9 INDUSTRIAL (S/N: JSC1-UP; MBD1-UP; JLW1-UP)
C9.3 (S/N: C9N1-UP)
Pumper:
HT400 (S/N: 7141-UP)
SBF214 (S/N: CSB1-UP)
Petroleum Engine:
C-15 PETROLEUM (S/N: Z2C1-UP)
C11 PETROLEUM (S/N: B5K1-UP)
C13 PETROLEUM (S/N: A5K1-UP)
C15 PETROLEUM (S/N: JDK1-UP)
C18 PETROLEUM (S/N: MPE1-UP; WJW1-UP)
C7 PETROLEUM (S/N: K2A1-UP)
C9 PETROLEUM (S/N: P9L1-UP; KLW1-UP)
Petroleum Power Train Package:
TH31-C9I (S/N: PAZ1-UP)
TH31-C9T (S/N: PAY1-UP)
TH35-C13I (S/N: PBY1-UP)
TH35-C13T (S/N: PBW1-UP)
TH35-C15I (S/N: PBN1-UP)
TH35-C15T (S/N: PBL1-UP)

A long term storage and recovery procedure is now available for the engines that are listed above. The new procedure describes the methods and materials that are used in order to provide the long term storage and the removal from storage of diesel engines. These procedures should be applied to engines that will be stored for a maximum of two years in a protected environment with the intent of later installation in Caterpillar and OEM machines. The procedure is adaptable back to the first production of the listed engines.

ReferenceRefer to Special Instruction, REHS5001 in order to view the procedure.

Caterpillar Information System:

2010/02/10 New Communication Software for the PL1000E Is Now Used on Commercial Engines {7620}
Procedure for the Proper Installation and Alignment of the Base Mounts on C18 Marine Generator Sets{1021, 7002} Procedure for the Proper Installation and Alignment of the Base Mounts on C18 Marine Generator Sets{1021, 7002}
C15 and C18 Industrial Engines Fuel Filter Base - Remove and Install - Secondary
CX31-P600 Petroleum Transmission Magnetic Screen (Transmission) - Clean - Dropbox
2012/03/09 New Boots for the Joystick Control in the Operator Station Are Now Available for Certain Excavators {5705}
C4.4 Industrial Engine Monitoring System - Table for the Indicator lamps
Inspection of the Duo-cone Seal Gp{4050, 4051, 7561} Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}
C27 and C32 Tier 4 Engines Exhaust Manifold
797 Off-Highway Truck Platform (Powered Stairway) - Lubricate - If Equipped
C13, C15, and C18 Tier 4 Final Engines Speed/Timing Sensor
797 Off-Highway Truck Electric Drive Pump (Powered Stairway) Oil - Change - If Equipped
The Long Term Storage and Recovery of Certain Commercial Engines{0355, 1000} The Long Term Storage and Recovery of Certain Commercial Engines{0355, 1000}
EMCP4.1/EMCP4.2 Component Location
C175-16 Locomotive Engine Fuel Control Manifold
3508C, 3512C and 3516C Locomotive Engines Turbocharger Oil Lines
3508C, 3512C and 3516C Locomotive Engines Water Lines
3508C, 3512C and 3516C Locomotive Engines Water Lines
C175-16 Locomotive Engine Fuel Lines
966H and 972H Wheel Loaders Leaving the Machine
2010/01/27 New Metering Pump Groups For Steering Control Prevent Oil Leaks {4300, 4301, 4312}
12M Series 2, 140M Series 2 and 160M Series 2 Motor Graders Machine Systems Air Lines
EMCP4.1/EMCP4.2 Electronic Control Module (Generator Set)
Cast Aluminum Stator Wheels for Torque Converters {3101, 3129} Cast Aluminum Stator Wheels for Torque Converters {3101, 3129}
C4.4 (Mech) Marine Generator Set MCS-3 V-Belt - Test
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.