Air Lines
Show/hide table
| |
| Illustration 1 | g03389880 |
Show/hide table
| Specification for 324-2861 Air Lines Gp | |||
| Item | Qty | Part | Specification Description |
| 1 | 1 | 1W-5455 Clamp | Reuse only if the clamp is release freely and not damaged.
Torque to |
| 2 | 2 | 8T-4780 Bolt | Torque to |
Caterpillar Information System:
2010/01/27 New Metering Pump Groups For Steering Control Prevent Oil Leaks {4300, 4301, 4312}
966H and 972H Wheel Loaders Leaving the Machine
C175-16 Locomotive Engine Fuel Lines
3508C, 3512C and 3516C Locomotive Engines Water Lines
3508C, 3512C and 3516C Locomotive Engines Water Lines
3508C, 3512C and 3516C Locomotive Engines Turbocharger Oil Lines
C175-16 Locomotive Engine Fuel Control Manifold
EMCP4.1/EMCP4.2 Component Location
2010/02/03 A Long Term Storage and Recovery Procedure Is Now Available for Certain Commercial Engines {1000}
2010/02/10 New Communication Software for the PL1000E Is Now Used on Commercial Engines {7620}
Procedure for the Proper Installation and Alignment of the Base Mounts on C18 Marine Generator Sets{1021, 7002} Procedure for the Proper Installation and Alignment of the Base Mounts on C18 Marine Generator Sets{1021, 7002}
C15 and C18 Industrial Engines Fuel Filter Base - Remove and Install - Secondary
EMCP4.1/EMCP4.2 Electronic Control Module (Generator Set)
Cast Aluminum Stator Wheels for Torque Converters {3101, 3129} Cast Aluminum Stator Wheels for Torque Converters {3101, 3129}
C4.4 (Mech) Marine Generator Set MCS-3 V-Belt - Test
2010/02/05 A New Cylinder Head Is Used on C175 Engines {1100}
2010/02/26 A New Gas Shutoff Valve Is Available for Some G3500 Engines {5479}
374F Excavator Hydraulic System Pilot Valve (Travel)
Procedure for Reworking the Diodes In the Circuits for the Fuel Level Gauge{7451, 7481} Procedure for Reworking the Diodes In the Circuits for the Fuel Level Gauge{7451, 7481}
C27 and C32 Engines for Caterpillar Built Machines Water Pump
C13, C15, and C18 Tier 4 Final Engines Connecting Rod Bearing Journal
797F Off-Highway Truck Power Train Axle Shaft - Remove and Install
C15 and C18 Industrial Engines Electronic Unit Injector
797F Off-Highway Truck Power Train Final Drive - Remove and Install - Horizontal