Turbocharger Oil Lines
Show/hide table
Illustration 1 | g03333099 |
Rear view of engine |
Show/hide table
Specification for 282-4201 Turbocharger Oil Lines Gp and 282-4202 Turbocharger Oil Lines Gp | |||
Item | Qty | Part | Specification description |
1 | 4 | 6V-5134 O-Ring Seal | Before assembly, lubricate the bore lightly with the lubricant that is being sealed or an approved equivalent. |
2 | 4 | 0L-1143 Bolt | Before assembly, lubricate threads and bearing surfaces with Loctite C5A Copper anti-seize. |
3 | 3 | 228-7091 O-Ring Seal | Before assembly, lubricate the bore with glycerin or an approved equivalent. |
Caterpillar Information System:
C175-16 Locomotive Engine Fuel Control Manifold
EMCP4.1/EMCP4.2 Component Location
2010/02/03 A Long Term Storage and Recovery Procedure Is Now Available for Certain Commercial Engines {1000}
2010/02/10 New Communication Software for the PL1000E Is Now Used on Commercial Engines {7620}
Procedure for the Proper Installation and Alignment of the Base Mounts on C18 Marine Generator Sets{1021, 7002} Procedure for the Proper Installation and Alignment of the Base Mounts on C18 Marine Generator Sets{1021, 7002}
C15 and C18 Industrial Engines Fuel Filter Base - Remove and Install - Secondary
CX31-P600 Petroleum Transmission Magnetic Screen (Transmission) - Clean - Dropbox
2012/03/09 New Boots for the Joystick Control in the Operator Station Are Now Available for Certain Excavators {5705}
C4.4 Industrial Engine Monitoring System - Table for the Indicator lamps
Inspection of the Duo-cone Seal Gp{4050, 4051, 7561} Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}
C27 and C32 Tier 4 Engines Exhaust Manifold
797 Off-Highway Truck Platform (Powered Stairway) - Lubricate - If Equipped
3508C, 3512C and 3516C Locomotive Engines Water Lines
3508C, 3512C and 3516C Locomotive Engines Water Lines
C175-16 Locomotive Engine Fuel Lines
966H and 972H Wheel Loaders Leaving the Machine
2010/01/27 New Metering Pump Groups For Steering Control Prevent Oil Leaks {4300, 4301, 4312}
12M Series 2, 140M Series 2 and 160M Series 2 Motor Graders Machine Systems Air Lines
EMCP4.1/EMCP4.2 Electronic Control Module (Generator Set)
Cast Aluminum Stator Wheels for Torque Converters {3101, 3129} Cast Aluminum Stator Wheels for Torque Converters {3101, 3129}
C4.4 (Mech) Marine Generator Set MCS-3 V-Belt - Test
2010/02/05 A New Cylinder Head Is Used on C175 Engines {1100}
2010/02/26 A New Gas Shutoff Valve Is Available for Some G3500 Engines {5479}
374F Excavator Hydraulic System Pilot Valve (Travel)