3508C, 3512C and 3516C Locomotive Engines Caterpillar


Water Lines

Usage:

3516C F3Z


Illustration 1g02081535
Front view of engine


Illustration 2g02081536
Right side view of engine

Table 1
Specification for 210-2575 Water Lines Gp 
Item  Qty  Part  Specification description 
6V-1454 O-Ring Seal  Lightly lubricate the bore with glycerin. 
6V-5066 O-Ring Seal  Lightly lubricate the bore with glycerin. 
6V-6609 O-Ring Seal  Lightly lubricate the bore with glycerin or an approved equivalent. 

Caterpillar Information System:

3508C, 3512C and 3516C Locomotive Engines Turbocharger Oil Lines
C175-16 Locomotive Engine Fuel Control Manifold
EMCP4.1/EMCP4.2 Component Location
2010/02/03 A Long Term Storage and Recovery Procedure Is Now Available for Certain Commercial Engines {1000}
2010/02/10 New Communication Software for the PL1000E Is Now Used on Commercial Engines {7620}
Procedure for the Proper Installation and Alignment of the Base Mounts on C18 Marine Generator Sets{1021, 7002} Procedure for the Proper Installation and Alignment of the Base Mounts on C18 Marine Generator Sets{1021, 7002}
C15 and C18 Industrial Engines Fuel Filter Base - Remove and Install - Secondary
CX31-P600 Petroleum Transmission Magnetic Screen (Transmission) - Clean - Dropbox
2012/03/09 New Boots for the Joystick Control in the Operator Station Are Now Available for Certain Excavators {5705}
C4.4 Industrial Engine Monitoring System - Table for the Indicator lamps
Inspection of the Duo-cone Seal Gp{4050, 4051, 7561} Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}
C27 and C32 Tier 4 Engines Exhaust Manifold
3508C, 3512C and 3516C Locomotive Engines Water Lines
C175-16 Locomotive Engine Fuel Lines
966H and 972H Wheel Loaders Leaving the Machine
2010/01/27 New Metering Pump Groups For Steering Control Prevent Oil Leaks {4300, 4301, 4312}
12M Series 2, 140M Series 2 and 160M Series 2 Motor Graders Machine Systems Air Lines
EMCP4.1/EMCP4.2 Electronic Control Module (Generator Set)
Cast Aluminum Stator Wheels for Torque Converters {3101, 3129} Cast Aluminum Stator Wheels for Torque Converters {3101, 3129}
C4.4 (Mech) Marine Generator Set MCS-3 V-Belt - Test
2010/02/05 A New Cylinder Head Is Used on C175 Engines {1100}
2010/02/26 A New Gas Shutoff Valve Is Available for Some G3500 Engines {5479}
374F Excavator Hydraulic System Pilot Valve (Travel)
Procedure for Reworking the Diodes In the Circuits for the Fuel Level Gauge{7451, 7481} Procedure for Reworking the Diodes In the Circuits for the Fuel Level Gauge{7451, 7481}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.