A New Cylinder Head Is Used on C175 Engines {1100}
- Engine:
- C175-16 (S/N: WYB1-UP)
Description of Change: The new cylinder head has been created due to a change in the supplier.
Adaptable To: The new 328-7083 Cylinder Head Gp is a direct replacement for the following cylinder head groups:
Refer to Table 1 for the parts that are needed in order to install the new 328-7083 Cylinder Head Gp in place of the existing 340-6962 Cylinder Head Gp.Show/hide table
| Parts for 340-6962 Cylinder Head Gp | ||
| Part Number | Description | Quantity |
| 344-3445 | Spacer | 1 |
| 331-3650 | Cover | 1 |
| 341-2378 | Engine Harness As | 1 |
| 331-3674 | Tube As | 1 |
Show/hide table
| Parts for 336-3641 Cylinder Head Gp | ||
| Part Number | Description | Quantity |
| 325-2665 | Support As | 1 |
| 325-2670 | Bolt | 3 |
| 325-2663 | Rocker Shaft Assembly | 1 |
| 344-3445 | Spacer | 1 |
| 331-3650 | Cover | 1 |
| 341-2378 | Engine Harness As | 1 |
| 331-3674 | Tube As | 1 |
Caterpillar Information System:
C4.4 (Mech) Marine Generator Set MCS-3 V-Belt - Test
Cast Aluminum Stator Wheels for Torque Converters {3101, 3129} Cast Aluminum Stator Wheels for Torque Converters {3101, 3129}
EMCP4.1/EMCP4.2 Electronic Control Module (Generator Set)
12M Series 2, 140M Series 2 and 160M Series 2 Motor Graders Machine Systems Air Lines
2010/01/27 New Metering Pump Groups For Steering Control Prevent Oil Leaks {4300, 4301, 4312}
966H and 972H Wheel Loaders Leaving the Machine
C175-16 Locomotive Engine Fuel Lines
3508C, 3512C and 3516C Locomotive Engines Water Lines
3508C, 3512C and 3516C Locomotive Engines Water Lines
3508C, 3512C and 3516C Locomotive Engines Turbocharger Oil Lines
C175-16 Locomotive Engine Fuel Control Manifold
EMCP4.1/EMCP4.2 Component Location
2010/02/26 A New Gas Shutoff Valve Is Available for Some G3500 Engines {5479}
374F Excavator Hydraulic System Pilot Valve (Travel)
Procedure for Reworking the Diodes In the Circuits for the Fuel Level Gauge{7451, 7481} Procedure for Reworking the Diodes In the Circuits for the Fuel Level Gauge{7451, 7481}
C27 and C32 Engines for Caterpillar Built Machines Water Pump
C13, C15, and C18 Tier 4 Final Engines Connecting Rod Bearing Journal
797F Off-Highway Truck Power Train Axle Shaft - Remove and Install
C15 and C18 Industrial Engines Electronic Unit Injector
797F Off-Highway Truck Power Train Final Drive - Remove and Install - Horizontal
C27 Generator Set Engines Connecting Rod
797F Off-Highway Truck Power Train Final Drive, Brake and Wheel (Rear) - Remove and Install
TH31-E61 and TH35-E81 Petroleum Transmissions Component Location
C13, C15, and C18 Tier 4 Interim Engines Diesel Particulate Filter Has High Inlet Pressure