New Communication Software for the PL1000E Is Now Used on Commercial Engines {7620}
- Electric Power Generation:
- All
- Engine: Industrial, Marine, and Generator Set that Use Flash Programming
- All
- All
ReferenceSpecial Instruction, REHS4498, "PL1000E Quick Reference Guide"
ReferenceSpecial Instruction, REHS2362, "Installation Guide for the PL1000E Communications ECM"
ReferenceSystems Operation Troubleshooting Testing and Adjusting, RENR8091, "PL1000E Communication ECM"
ReferenceElectronic Media CD"EERP1000"
Description of Change: New communication software has been released for use on commercial engines.
Adaptable To: The 355-9210 Communication Software Gp has been released as a direct replacement for the existing 342-2512 Communication Software Gp.
The 355-9210 Communication Software Gp provides the same functionality as the 342-2512 Communication Software Gp. The 355-9210 Communication Software Gp adds the following improvement:
- The software conforms to Transmission Control Protocol/Internet Protocol (TCP/IP) specifications for hard disconnect and reconnect.
Caterpillar Information System:
Procedure for the Proper Installation and Alignment of the Base Mounts on C18 Marine Generator Sets{1021, 7002} Procedure for the Proper Installation and Alignment of the Base Mounts on C18 Marine Generator Sets{1021, 7002}
C15 and C18 Industrial Engines Fuel Filter Base - Remove and Install - Secondary
CX31-P600 Petroleum Transmission Magnetic Screen (Transmission) - Clean - Dropbox
2012/03/09 New Boots for the Joystick Control in the Operator Station Are Now Available for Certain Excavators {5705}
C4.4 Industrial Engine Monitoring System - Table for the Indicator lamps
Inspection of the Duo-cone Seal Gp{4050, 4051, 7561} Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}
C27 and C32 Tier 4 Engines Exhaust Manifold
797 Off-Highway Truck Platform (Powered Stairway) - Lubricate - If Equipped
C13, C15, and C18 Tier 4 Final Engines Speed/Timing Sensor
797 Off-Highway Truck Electric Drive Pump (Powered Stairway) Oil - Change - If Equipped
The Long Term Storage and Recovery of Certain Commercial Engines{0355, 1000} The Long Term Storage and Recovery of Certain Commercial Engines{0355, 1000}
C13, C15, and C18 Tier 4 Interim Engines Aftertreatment Cooling Fan - Test
2010/02/03 A Long Term Storage and Recovery Procedure Is Now Available for Certain Commercial Engines {1000}
EMCP4.1/EMCP4.2 Component Location
C175-16 Locomotive Engine Fuel Control Manifold
3508C, 3512C and 3516C Locomotive Engines Turbocharger Oil Lines
3508C, 3512C and 3516C Locomotive Engines Water Lines
3508C, 3512C and 3516C Locomotive Engines Water Lines
C175-16 Locomotive Engine Fuel Lines
966H and 972H Wheel Loaders Leaving the Machine
2010/01/27 New Metering Pump Groups For Steering Control Prevent Oil Leaks {4300, 4301, 4312}
12M Series 2, 140M Series 2 and 160M Series 2 Motor Graders Machine Systems Air Lines
EMCP4.1/EMCP4.2 Electronic Control Module (Generator Set)
Cast Aluminum Stator Wheels for Torque Converters {3101, 3129} Cast Aluminum Stator Wheels for Torque Converters {3101, 3129}