Electric Drive Pump (Powered Stairway) Oil - Change - If Equipped
Show/hide table
| PERHATIAN |
|---|
|
Berhati-hatilah agar cairan tidak tumpah selama pemeriksaan, perawatan, pengujian, penyetelan, dan perbaikan produk. Siapkan wadah penampung cairan sebelum membuka kompartemen atau membongkar komponen yang berisi cairan. |
- Siapkan alat berat untuk perawatan. Lihat Buku Petunjuk Pengoperasian dan Perawatan, "Mempersiapkan Alat Berat untuk Perawatan".
Show/hide table
Ilustrasi 1 g02078415 - Lepaskan pelat tapak (1) dari platform tangga daya.
Show/hide table
Ilustrasi 2 g02079313 - Lepaskan tutup pengisian (2) untuk tangki persediaan.
- Gunakan perangkat isap untuk mengekstraksi oli melalui leher pengisian.
- Tingkat oli untuk tangga daya terlihat melalui tangki persediaan oli yang terbuat dari bahan plastik bening (3).
- Isi tangki persediaan untuk tangga daya ke tingkat penuh (4). Lihat Buku Petunjuk Pengoperasian dan Perawatan, "Viskositas Pelumas". Lihat Buku Petunjuk Pengoperasian dan Perawatan, "Kapasitas (Pengisian Ulang)".
Caterpillar Information System:
The Long Term Storage and Recovery of Certain Commercial Engines{0355, 1000} The Long Term Storage and Recovery of Certain Commercial Engines{0355, 1000}
C13, C15, and C18 Tier 4 Interim Engines Aftertreatment Cooling Fan - Test
C6.6 Marine Generator Set E539 High Intake Manifold Air Temperature
C6.6 Marine Generator Set E398 Low Fuel Rail Pressure
C6.6 Marine Generator Set E396 High Fuel Rail Pressure
C6.6 Marine Generator Set E362 Engine Overspeed
C13, C15, and C18 Tier 4 Interim Engines Data Link - Test
Procedure for Reworking the Diodes In the Alternator Charging Circuit{1405, 7451} Procedure for Reworking the Diodes In the Alternator Charging Circuit{1405, 7451}
C27 Generator Set Engines Coolant Temperature Sensor
Updating the Wiring Harness of the Engine Brake on Some C15 Engines{1290, 1408} Updating the Wiring Harness of the Engine Brake on Some C15 Engines{1290, 1408}
Recommended Storage Procedures For Hydraulic Excavators {0355, 1000, 1250, 7000} Recommended Storage Procedures For Hydraulic Excavators {0355, 1000, 1250, 7000}
797 Off-Highway Truck Electric Drive Pump (Powered Stairway) Oil Level - Check - If Equipped
C13, C15, and C18 Tier 4 Final Engines Speed/Timing Sensor
797 Off-Highway Truck Platform (Powered Stairway) - Lubricate - If Equipped
C27 and C32 Tier 4 Engines Exhaust Manifold
Inspection of the Duo-cone Seal Gp{4050, 4051, 7561} Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}
C4.4 Industrial Engine Monitoring System - Table for the Indicator lamps
2012/03/09 New Boots for the Joystick Control in the Operator Station Are Now Available for Certain Excavators {5705}
CX31-P600 Petroleum Transmission Magnetic Screen (Transmission) - Clean - Dropbox
C15 and C18 Industrial Engines Fuel Filter Base - Remove and Install - Secondary
Procedure for the Proper Installation and Alignment of the Base Mounts on C18 Marine Generator Sets{1021, 7002} Procedure for the Proper Installation and Alignment of the Base Mounts on C18 Marine Generator Sets{1021, 7002}
2010/02/10 New Communication Software for the PL1000E Is Now Used on Commercial Engines {7620}
2010/02/03 A Long Term Storage and Recovery Procedure Is Now Available for Certain Commercial Engines {1000}
EMCP4.1/EMCP4.2 Component Location