797 Off-Highway Truck Caterpillar


Platform (Powered Stairway) - Lubricate - If Equipped

Usage:

797 5YW

  • Siapkan alat berat untuk perawatan. Lihat Buku Petunjuk Pengoperasian dan Perawatan, "Mempersiapkan Alat Berat untuk Perawatan".


    Ilustrasi 1g02078415

  • Lepaskan pelat tapak (1) dari platform tangga daya.

  • Bersihkan fitting sebelum mengaplikasikan pelumas.


    Ilustrasi 2g02079553

  • Lumasi fitting (2) untuk silinder hidrolik.

  • Lumasi fitting (3) untuk bantalan poros.
  • Caterpillar Information System:

    C13, C15, and C18 Tier 4 Final Engines Speed/Timing Sensor
    797 Off-Highway Truck Electric Drive Pump (Powered Stairway) Oil - Change - If Equipped
    The Long Term Storage and Recovery of Certain Commercial Engines{0355, 1000} The Long Term Storage and Recovery of Certain Commercial Engines{0355, 1000}
    C13, C15, and C18 Tier 4 Interim Engines Aftertreatment Cooling Fan - Test
    C6.6 Marine Generator Set E539 High Intake Manifold Air Temperature
    C6.6 Marine Generator Set E398 Low Fuel Rail Pressure
    C6.6 Marine Generator Set E396 High Fuel Rail Pressure
    C6.6 Marine Generator Set E362 Engine Overspeed
    C13, C15, and C18 Tier 4 Interim Engines Data Link - Test
    Procedure for Reworking the Diodes In the Alternator Charging Circuit{1405, 7451} Procedure for Reworking the Diodes In the Alternator Charging Circuit{1405, 7451}
    C27 Generator Set Engines Coolant Temperature Sensor
    Updating the Wiring Harness of the Engine Brake on Some C15 Engines{1290, 1408} Updating the Wiring Harness of the Engine Brake on Some C15 Engines{1290, 1408}
    C27 and C32 Tier 4 Engines Exhaust Manifold
    Inspection of the Duo-cone Seal Gp{4050, 4051, 7561} Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}
    C4.4 Industrial Engine Monitoring System - Table for the Indicator lamps
    2012/03/09 New Boots for the Joystick Control in the Operator Station Are Now Available for Certain Excavators {5705}
    CX31-P600 Petroleum Transmission Magnetic Screen (Transmission) - Clean - Dropbox
    C15 and C18 Industrial Engines Fuel Filter Base - Remove and Install - Secondary
    Procedure for the Proper Installation and Alignment of the Base Mounts on C18 Marine Generator Sets{1021, 7002} Procedure for the Proper Installation and Alignment of the Base Mounts on C18 Marine Generator Sets{1021, 7002}
    2010/02/10 New Communication Software for the PL1000E Is Now Used on Commercial Engines {7620}
    2010/02/03 A Long Term Storage and Recovery Procedure Is Now Available for Certain Commercial Engines {1000}
    EMCP4.1/EMCP4.2 Component Location
    C175-16 Locomotive Engine Fuel Control Manifold
    3508C, 3512C and 3516C Locomotive Engines Turbocharger Oil Lines
    Back to top
    The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
    CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.