2012/03/09 Caterpillar


New Boots for the Joystick Control in the Operator Station Are Now Available for Certain Excavators {5705}

Usage:

325D L A3R
Excavator:
307D (S/N: DSG1-UP)
308D (S/N: GBT1-UP)
311D (S/N: CLA1-UP; LKA1-UP; PNJ1-UP; DWR1-UP; DDW1-UP)
312D (S/N: JBC1-UP; LRK1-UP; XGK1-UP; RHL1-UP; DLP1-UP; KES1-UP; HCW1-UP; TGY1-UP)
312D2 (S/N: KLE1-UP; MGJ1-UP; RXZ1-UP)
313D (S/N: KXD1-UP; WPK1-UP)
313D2 (S/N: PLD1-UP)
314D (S/N: BYJ1-UP; TXN1-UP; WLN1-UP; PDP1-UP; SBP1-UP; XHR1-UP; SSZ1-UP)
315D (S/N: JHA1-UP; KBD1-UP; BZN1-UP; CJN1-UP; JGS1-UP)
318D (S/N: ZKJ1-UP)
318D2 (S/N: WGR1-UP; TZS1-UP)
319D (S/N: ZCA1-UP; AYF1-UP; FMH1-UP; KFM1-UP; RJP1-UP; EAW1-UP)
320D (S/N: JZA1-UP; ZGB1-UP; HJC1-UP; JPD1-UP; MZD1-UP; DHE1-UP; MDE1-UP; TAE1-UP; A6F1-UP; A8F1-UP; A9F1-UP; KGF1-UP; KTF1-UP; KZF1-UP; MGG1-UP; MCH1-UP; TDH1-UP; DHK1-UP; FXK1-UP; XCK1-UP; FAL1-UP; GKL1-UP; KLM1-UP; PCM1-UP; CWN1-UP; KHN1-UP; SPN1-UP; WBN1-UP; BZP1-UP; GDP1-UP; AMR1-UP; YDS1-UP; EJT1-UP; BWW1-UP; GMX1-UP; PCX1-UP; PHX1-UP; CXY1-UP; EBY1-UP; CYZ1-UP; JFZ1-UP; JGZ1-UP)
321D (S/N: TXA1-UP; PBD1-UP; MPG1-UP; NAS1-UP; MDT1-UP; KBZ1-UP)
323D (S/N: WGC1-UP; YSD1-UP; PBE1-UP; WNE1-UP; GTF1-UP; NZF1-UP; ZMF1-UP; LFL1-UP; NES1-UP)
324D (S/N: MND1-UP; JJG1-UP; GPK1-UP; TSN1-UP; DFP1-UP; JZR1-UP; JAT1-UP; PYT1-UP; CJX1-UP)
325D (S/N: GPB1-UP; KBE1-UP; PKE1-UP; KDG1-UP; DBH1-UP; ERK1-UP; AZP1-UP; A3R1-UP; SCR1-UP; CYW1-UP)
326D (S/N: PJM1-UP)
328D (S/N: SWF1-UP; GTN1-UP; MKR1-UP; RMX1-UP)
329D (S/N: MNB1-UP; DJF1-UP; JHJ1-UP; RSK1-UP; WDK1-UP; TZL1-UP; BYS1-UP; WLT1-UP; YFW1-UP; DTZ1-UP)
330D (S/N: GBC1-UP; NBD1-UP; R2D1-UP; GGE1-UP; B6H1-UP; EAH1-UP; FFK1-UP; JLP1-UP; MWP1-UP; RAS1-UP; EDX1-UP; MEY1-UP)
336D (S/N: J2F1-UP; PRF1-UP; WRK1-UP; W3K1-UP; MPL1-UP; ZML1-UP; MDS1-UP; JBT1-UP; KKT1-UP; M4T1-UP; PGW1-UP)
340D (S/N: JTN1-UP)
345C (S/N: TBA1-UP; ESD1-UP; WDE1-UP; TDG1-UP; TAJ1-UP; S5M1-UP; DHP1-UP; PJW1-UP; BWY1-UP)
345D (S/N: BYC1-UP; RAE1-UP; YEE1-UP; NEG1-UP; EEH1-UP; RAJ1-UP; MLK1-UP; JKN1-UP; PBT1-UP)
349D (S/N: JGB1-UP; WTD1-UP; GKF1-UP; NNF1-UP; PZG1-UP; KLH1-UP; RBJ1-UP; MEN1-UP; KHS1-UP)
365C (S/N: ELC1-UP; GWC1-UP; MEM1-UP; FEN1-UP; PAR1-UP; MCS1-UP; MCY1-UP)
374D (S/N: PJA1-UP; PAP1-UP; PAS1-UP; PAX1-UP)
385C (S/N: EDA1-UP; MMA1-UP; KGB1-UP; KBC1-UP; SBE1-UP; T2E1-UP; T2F1-UP; KKK1-UP; EAM1-UP; JCM1-UP; MNZ1-UP)
390D (S/N: BYP1-UP; WAP1-UP; WBT1-UP; KCZ1-UP)
Mobile Hydraulic Power Unit:
325D MHPU (S/N: H3N1-UP)
329D MHPU (S/N: J9D1-UP)
330D MHPU (S/N: H3D1-UP)
336D MHPU (S/N: J6D1-UP; JRX1-UP)
349D MHPU (S/N: DKN1-UP)
Service Magazine SEPD1408, 9 March 2012, "New Boots for the Joystick Control in the Operator Station Are Now Available for Certain Excavators". Disregard this article. See the article that follows.

Description of Change: Two new boots for the joysticks have been made available for the various models of excavators. The base of the boot has been redesigned. The boot provides a stronger connection with the console. The improved boots have added a ridge. The new boots are interchangeable with the existing boots. The existing boot does not have the ridge.

Adaptable To: The new 353-2149 Boot (LH) and the 353-2150 Boot (RH) replace the existing 235-8971 Boot (LH) and the 235-8972 Boot (RH).




Illustration 1g02091033

(1) Added ridge

(2) Improved base

Table 1
Qty     New Pt. No.     Part Name     Former Pt. No.    
1     353-2149     LH Boot     235-8971    
1     353-2150     RH Boot     235-8972    

Caterpillar Information System:

C4.4 Industrial Engine Monitoring System - Table for the Indicator lamps
Inspection of the Duo-cone Seal Gp{4050, 4051, 7561} Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}
C27 and C32 Tier 4 Engines Exhaust Manifold
797 Off-Highway Truck Platform (Powered Stairway) - Lubricate - If Equipped
C13, C15, and C18 Tier 4 Final Engines Speed/Timing Sensor
797 Off-Highway Truck Electric Drive Pump (Powered Stairway) Oil - Change - If Equipped
The Long Term Storage and Recovery of Certain Commercial Engines{0355, 1000} The Long Term Storage and Recovery of Certain Commercial Engines{0355, 1000}
C13, C15, and C18 Tier 4 Interim Engines Aftertreatment Cooling Fan - Test
C6.6 Marine Generator Set E539 High Intake Manifold Air Temperature
C6.6 Marine Generator Set E398 Low Fuel Rail Pressure
C6.6 Marine Generator Set E396 High Fuel Rail Pressure
C6.6 Marine Generator Set E362 Engine Overspeed
CX31-P600 Petroleum Transmission Magnetic Screen (Transmission) - Clean - Dropbox
C15 and C18 Industrial Engines Fuel Filter Base - Remove and Install - Secondary
Procedure for the Proper Installation and Alignment of the Base Mounts on C18 Marine Generator Sets{1021, 7002} Procedure for the Proper Installation and Alignment of the Base Mounts on C18 Marine Generator Sets{1021, 7002}
2010/02/10 New Communication Software for the PL1000E Is Now Used on Commercial Engines {7620}
2010/02/03 A Long Term Storage and Recovery Procedure Is Now Available for Certain Commercial Engines {1000}
EMCP4.1/EMCP4.2 Component Location
C175-16 Locomotive Engine Fuel Control Manifold
3508C, 3512C and 3516C Locomotive Engines Turbocharger Oil Lines
3508C, 3512C and 3516C Locomotive Engines Water Lines
3508C, 3512C and 3516C Locomotive Engines Water Lines
C175-16 Locomotive Engine Fuel Lines
966H and 972H Wheel Loaders Leaving the Machine
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.