Valve Cover - Remove and Install
Show/hide table
| NOTICE |
|---|
|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Remove bolts (1) and valve cover (2).
Show/hide table
Illustration 2 g00923171 - If necessary, remove seal (3) from valve cover (2).
Show/hide table
| |
| Illustration 1 | g01052600 |
- Install valve cover (2) in the reverse order of removal.
Caterpillar Information System:
G3304B and G3306B Engines Starting - Test
349F and 352F Excavators ARD Spark Plug - Clean
2009/12/10 Enhanced Performance for the Regeneration System on C13 and C15 Engines {1901, 1920}
793F Off-Highway Truck Engine Supplement Aftercooler Core - Remove and Install
G3304B and G3306B Engines Fuel Actuator - Test
12M Motor Grader Fire Extinguisher Location
G3304B and G3306B Engines Oxygen Sensor
3508C, 3512C and 3516C Locomotive Engines Water Lines
3508C, 3512C and 3516C Locomotive Engines Water Lines
349F and 352F Excavators Circuit Breakers - Reset
349F and 352F Excavators Hydraulic System Oil Filter (Return) - Replace
C13, C15, and C18 Tier 4 Interim Engines Aftertreatment Identification Module - Test
3508, 3512 and 3516 Generator Set Engines Rocker Shaft and Push Rods - Remove and Install
C9.3 Engines for Caterpillar Built Machines Cylinder Is Noisy
C15 Engine Stopping the Engine
G3304B and G3306B Engines Aftercooler - Test - If Equipped
Guideline for Roller and Idler Component Reuse {4159, 4180} Guideline for Roller and Idler Component Reuse {4159, 4180}
G3304B and G3306B Engines Cooling System - Check
793F Off-Highway Truck Engine Supplement Air Cleaner - Remove and Install
C32 Marine Engine Oil Cooler Core - Check/Clean/Test - Engines Which Are Rated "E"
C27 and C32 Industrial Engines Turbocharger - Remove and Install
793F Off-Highway Truck Engine Supplement Alternator - Remove and Install
3508, 3512 and 3516 Generator Set Engines Rocker Shaft - Disassemble
3508, 3512 and 3516 Generator Set Engines Rocker Shaft - Assemble