Air Cleaner - Remove and Install
- Attach a suitable lifting device onto air cleaner (1). The weight of air cleaner (1) is approximately
159 kg (350 lb) .Show/hide tableIllustration 2 g02026215 - Disconnect hoses (2).
Show/hide table
Illustration 3 g02026233 - Remove mud flap (3).
Show/hide table
Illustration 4 g02026355 - Remove bolts (4) and position brace assemblies (5) out of the way.
Show/hide table
Illustration 5 g01302132 - Remove air cleaner (1).
Show/hide table
Illustration 6 g03422440 - Remove clamp (6). Remove cup assembly (7).
Show/hide table
Illustration 7 g03422457 - Remove seal (8).
Show/hide table
Illustration 8 g03422464 - Remove shield (9). Remove shield (10). Remove shield (11).
Show/hide table
Illustration 9 g03422465 - Attach Tooling (A) and a suitable lifting device to body assembly (12). The weight of body assembly (12) is approximately
52 kg (115 lb) .Show/hide tableIllustration 10 g03422468 - Remove bolts (13). Remove body assembly (12).
Show/hide table
Illustration 11 g03422471 - Remove primary air filter (14).
Show/hide table
Illustration 12 g03422472 - Remove retainer (15) from the inside of the primary air filter.
Show/hide table
Illustration 13 g03422473 - Remove nut (16) from the primary air filter.
Show/hide table
Illustration 14 g03422475 - Remove cotter (17). Remove nut (18). Remove secondary air filter (19).
Show/hide table
Illustration 1 | g01302132 |
- Install air cleaner (1) in the reverse order of removal.
Caterpillar Information System:
G3304B and G3306B Engines Cooling System - Check
Guideline for Roller and Idler Component Reuse {4159, 4180} Guideline for Roller and Idler Component Reuse {4159, 4180}
G3304B and G3306B Engines Aftercooler - Test - If Equipped
C15 Engine Stopping the Engine
C9.3 Engines for Caterpillar Built Machines Cylinder Is Noisy
3508, 3512 and 3516 Generator Set Engines Rocker Shaft and Push Rods - Remove and Install
3508, 3512 and 3516 Generator Set Engines Valve Cover - Remove and Install
G3304B and G3306B Engines Starting - Test
349F and 352F Excavators ARD Spark Plug - Clean
2009/12/10 Enhanced Performance for the Regeneration System on C13 and C15 Engines {1901, 1920}
793F Off-Highway Truck Engine Supplement Aftercooler Core - Remove and Install
G3304B and G3306B Engines Fuel Actuator - Test
C32 Marine Engine Oil Cooler Core - Check/Clean/Test - Engines Which Are Rated "E"
C27 and C32 Industrial Engines Turbocharger - Remove and Install
793F Off-Highway Truck Engine Supplement Alternator - Remove and Install
3508, 3512 and 3516 Generator Set Engines Rocker Shaft - Disassemble
3508, 3512 and 3516 Generator Set Engines Rocker Shaft - Assemble
2010/03/02 An Improved Water Line Is Used and Available on Certain Commercial Engines and Pleasure Craft {1355, 1380, 1393}
793F Off-Highway Truck Engine Supplement Air Compressor - Remove and Install
2010/03/09 An Update to the Wiring Harness of the Engine Brake on Some C15 Truck Engines Is Now Used {1290, 1408, 1900}
349F and 352F Excavators Engine Starting with Auxiliary Start Receptacle - If Equipped
C11 and C13 Engines Water Temperature Regulator Housing
G3512E Generator Set Engine Engine Cranks but Does Not Start
G3512E Generator Set Engine Engine Overcrank Occurrence