Water Lines
Show/hide table
Illustration 1 | g02025304 |
Top view of engine |
Show/hide table
Illustration 2 | g02025305 |
Right side view of engine |
Show/hide table
Illustration 3 | g02025306 |
Front view of engine |
Show/hide table
Specification for 310-5147 Water Lines Gp | |||
Item | Qty | Part | Specification description |
1 | 6 | 6V-8398 O-Ring Seal | Lightly lubricate the bore with glycerin or an approved equivalent. |
2 | 16 | 2A-4639 Bolt | Apply Loctite C5A Copper Anti-Seize to the threads. |
3 | 16 | 3B-1915 Bolt | Apply Loctite C5A Copper Anti-Seize to the threads. |
4 | 8 | 3K-0360 O-Ring Seal | Lightly lubricate the bore with glycerin or an approved equivalent. |
Caterpillar Information System:
3508C, 3512C and 3516C Locomotive Engines Water Lines
349F and 352F Excavators Circuit Breakers - Reset
349F and 352F Excavators Hydraulic System Oil Filter (Return) - Replace
C13, C15, and C18 Tier 4 Interim Engines Aftertreatment Identification Module - Test
349F and 352F Excavators Travel Alarm - Test - If Equipped
3508, 3512 and 3516 Generator Set Engines Flywheel Housing - Remove and Install
2010/01/08 A New Oil Pan Gasket Is Used for Certain C18 Marine Engines, and Available for Certain 3406E and C15 and C18 Marine Engines {1302, 7555}
793F Off-Highway Truck Engine Supplement Hood - Remove and Install
C13, C15, and C18 Tier 4 Interim Engines Oil Contains Fuel
320E and 323E Excavators Swing Drive Oil - Change
Reuse and Testing of Fuel Injection Pump Housing {0374, 1000, 1250, 1300} Reuse and Testing of Fuel Injection Pump Housing {0374, 1000, 1250, 1300}
TH31-E61 and TH35-E81 Petroleum Transmissions Maintenance Interval Schedule
G3304B and G3306B Engines Oxygen Sensor
12M Motor Grader Fire Extinguisher Location
G3304B and G3306B Engines Fuel Actuator - Test
793F Off-Highway Truck Engine Supplement Aftercooler Core - Remove and Install
2009/12/10 Enhanced Performance for the Regeneration System on C13 and C15 Engines {1901, 1920}
349F and 352F Excavators ARD Spark Plug - Clean
G3304B and G3306B Engines Starting - Test
3508, 3512 and 3516 Generator Set Engines Valve Cover - Remove and Install
3508, 3512 and 3516 Generator Set Engines Rocker Shaft and Push Rods - Remove and Install
C9.3 Engines for Caterpillar Built Machines Cylinder Is Noisy
C15 Engine Stopping the Engine
G3304B and G3306B Engines Aftercooler - Test - If Equipped