Hood - Remove and Install
Show/hide table
 |
|
The space between the body and the frame becomes a zero clearance area when the body is lowered. Failure to install the retaining cable can result in injury or death to personnel working in this area. |
- Install the truck body retaining cables. Operation and Maintenance Manual, "Cable (Truck Body Retaining)".
Show/hide table
Illustration 1 g02024589 - Secure rear hood assembly (1) in the open position.
Show/hide table
Illustration 2 g02024593 Show/hide table
Illustration 3 g02025375 - Attach a suitable lifting device onto rear hood assembly (1). The weight of rear hood assembly (1) is approximately
76 kg (168 lb) . Disconnect struts (2). Remove bolts (3). Remove rear hood panel (1).Show/hide table
Illustration 4 g02025961 - Secure front hood assembly (4) in the open position.
Show/hide table
Illustration 5 g02026159 - Attach a suitable lifting device onto front hood assembly (4). The weight of front hood assembly (4) is approximately
75 kg (165 lb) .Show/hide table
Illustration 6 g02026165 - Disconnect struts (5). Disconnect brace (6).
Show/hide table
Illustration 7 g02024606 - Remove bolts (7). Remove front hood assembly (4).
Show/hide table
Illustration 8 g02026167 - Remove panels (8).
- Install rear hood assembly (1), front hood assembly (4), and panels (8) in the reverse order.
Caterpillar Information System:
C13, C15, and C18 Tier 4 Interim Engines Oil Contains Fuel
320E and 323E Excavators Swing Drive Oil - Change
Reuse and Testing of Fuel Injection Pump Housing {0374, 1000, 1250, 1300} Reuse and Testing of Fuel Injection Pump Housing {0374, 1000, 1250, 1300}
TH31-E61 and TH35-E81 Petroleum Transmissions Maintenance Interval Schedule
G3304B and G3306B Engines Gear Group (Front)
C32 Marine Engine Maintenance Recommendations - Engines Which Have "E" Ratings
3508, 3512 and 3516 Generator Set Engines Flywheel - Remove and Install
C9.3 Engine for Wheel Tractor-Scrapers Engine Cranks but Does Not Start
349F and 352F Excavators Radiator Core - Clean
349F and 352F Excavators Indicators and Gauges - Test
3508, 3512 and 3516 Generator Set Engines Air Starting Motor - Assemble
793F Off-Highway Truck Engine Supplement Modular Front End - Remove and Install
2010/01/08 A New Oil Pan Gasket Is Used for Certain C18 Marine Engines, and Available for Certain 3406E and C15 and C18 Marine Engines {1302, 7555}
3508, 3512 and 3516 Generator Set Engines Flywheel Housing - Remove and Install
349F and 352F Excavators Travel Alarm - Test - If Equipped
C13, C15, and C18 Tier 4 Interim Engines Aftertreatment Identification Module - Test
349F and 352F Excavators Hydraulic System Oil Filter (Return) - Replace
349F and 352F Excavators Circuit Breakers - Reset
3508C, 3512C and 3516C Locomotive Engines Water Lines
3508C, 3512C and 3516C Locomotive Engines Water Lines
G3304B and G3306B Engines Oxygen Sensor
12M Motor Grader Fire Extinguisher Location
G3304B and G3306B Engines Fuel Actuator - Test
793F Off-Highway Truck Engine Supplement Aftercooler Core - Remove and Install