Turbocharger
Show/hide table
| 图 1 | g01681513 |
Show/hide table
| 图 2 | g01681514 |
请按照以下步骤拧紧带夹 (1) 。
- 拧紧带夹组件至扭矩为 9.5 ± 1.0 N·m (85 ± 9 lb in)。
- 用软面锤轻轻敲打带夹周围。
- 再次拧紧带夹组件至扭矩为 9.5 ± 1.0 N·m (85 ± 9 lb in)。
(2) 组装前，将 4c-5599 防咬合剂 涂抹在垫圈表面和螺栓的螺纹上。
按照下列步骤拧紧卡箍组件 (3) 和涡轮卡箍组件 (4) ：
- 拧紧卡箍组件至扭矩为 14.0 ± 1.5 N·m (125 ± 13 lb in)。
- 用软面锤轻轻敲打卡箍组件周围。
- 再次拧紧卡箍组件至扭矩为 14.0 ± 1.5 N·m (125 ± 13 lb in)。
Caterpillar Information System:
3500B Generator Set Engines Turbocharger
C18 Fire Pump Industrial Engine Turbocharger - Install - Dual Turbocharger
C18 Fire Pump Industrial Engine Turbocharger - Remove - Dual Turbocharger
C18 Fire Pump Industrial Engine Fuel Filter Base - Install
C18 Fire Pump Industrial Engine Fuel Filter Base - Remove
C18 Fire Pump Industrial Engine Fuel Priming Pump - Remove and Install
G3516 Petroleum Engines Gas Pressure Regulator - Install
3500B Engines Air Inlet and Exhaust Lines
3500B and 3500C Marine Engines Camshaft
3408E and 3412E Engines for Caterpillar Built Machines Water Temperature Regulator
G3516 Petroleum Engines Gas Pressure Regulator - Remove
G3508B, G3512B, G3512B, G3516B and G3520B Petroleum Engines Air Starting Motor - Install
320D and 323D Excavators Machine System Specifications Grease Lines
G3508B, G3512B, G3512B, G3516B and G3520B Petroleum Engines Exhaust Elbow - Remove and Install
Upgrade to Air/Fuel Ratio Control, Nitrogen Oxide Sensor, and a Single Turbocharger for Enhanced Performance of G3508 Engines{1000, 1052, 1270, 191N} Upgrade to Air/Fuel Ratio Control, Nitrogen Oxide Sensor, and a Single Turbocharger for Enhanced Performance of G3508 Engines{1000, 1052, 1270, 191N}
R250 Automatic Voltage Regulator High Voltage
Parts for Updating Early 3406E Aftercooler Cores{1063} Parts for Updating Early 3406E Aftercooler Cores{1063}
R250 Automatic Voltage Regulator General Information
G3508B, G3512B, G3512B, G3516B and G3520B Petroleum Engines Aftercooler - Remove and Install
C18 Fire Pump Industrial Engine Water Pump - Remove
Prevention of Leaks in the C18 Marine Heat Exchanger Frame {1379, 1395} Prevention of Leaks in the C18 Marine Heat Exchanger Frame {1379, 1395}
No Starboard Throttle Signal{3065, 4490} No Starboard Throttle Signal{3065, 4490}
3500 Generator Sets with Dynamic Gas Blending Fan Drive Bearing - Lubricate
R250 Automatic Voltage Regulator No Voltage