Turbocharger
Show/hide table
| 图 1 | g01681253 |
发动机俯视图 | |
(1) 组装前，用 4C-5599 防咬合剂 润滑螺栓的螺纹及轴承表面。
(2) 八个锁紧螺母的扭矩 ... 54 ± 5 N·m (40 ± 4 lb ft)
按照以下步骤来拧紧空压机卡箍组件 (3) 和涡轮卡箍组件 (4) ：
- 拧紧卡箍组件至扭矩为 14.0 ± 1.5 N·m (125 ± 13 lb in)。
- 用软面锤轻轻敲打卡箍组件周围。
- 拧紧卡箍组件至扭矩为 14.0 ± 1.5 N·m (125 ± 13 lb in)。
Caterpillar Information System:
C18 Fire Pump Industrial Engine Turbocharger - Install - Dual Turbocharger
C18 Fire Pump Industrial Engine Turbocharger - Remove - Dual Turbocharger
C18 Fire Pump Industrial Engine Fuel Filter Base - Install
C18 Fire Pump Industrial Engine Fuel Filter Base - Remove
C18 Fire Pump Industrial Engine Fuel Priming Pump - Remove and Install
G3516 Petroleum Engines Gas Pressure Regulator - Install
3500B Engines Air Inlet and Exhaust Lines
3500B and 3500C Marine Engines Camshaft
3408E and 3412E Engines for Caterpillar Built Machines Water Temperature Regulator
G3516 Petroleum Engines Gas Pressure Regulator - Remove
G3508B, G3512B, G3512B, G3516B and G3520B Petroleum Engines Air Starting Motor - Install
C15 Petroleum Engines Acceleration Is Poor or Throttle Response Is Poor
3500B Engines for Caterpillar Built Power Modules Turbocharger
320D and 323D Excavators Machine System Specifications Grease Lines
G3508B, G3512B, G3512B, G3516B and G3520B Petroleum Engines Exhaust Elbow - Remove and Install
Upgrade to Air/Fuel Ratio Control, Nitrogen Oxide Sensor, and a Single Turbocharger for Enhanced Performance of G3508 Engines{1000, 1052, 1270, 191N} Upgrade to Air/Fuel Ratio Control, Nitrogen Oxide Sensor, and a Single Turbocharger for Enhanced Performance of G3508 Engines{1000, 1052, 1270, 191N}
R250 Automatic Voltage Regulator High Voltage
Parts for Updating Early 3406E Aftercooler Cores{1063} Parts for Updating Early 3406E Aftercooler Cores{1063}
R250 Automatic Voltage Regulator General Information
G3508B, G3512B, G3512B, G3516B and G3520B Petroleum Engines Aftercooler - Remove and Install
C18 Fire Pump Industrial Engine Water Pump - Remove
Prevention of Leaks in the C18 Marine Heat Exchanger Frame {1379, 1395} Prevention of Leaks in the C18 Marine Heat Exchanger Frame {1379, 1395}
No Starboard Throttle Signal{3065, 4490} No Starboard Throttle Signal{3065, 4490}
3500 Generator Sets with Dynamic Gas Blending Fan Drive Bearing - Lubricate