Removal Procedure
NOTICE |
---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products. Dispose of all fluids according to local regulations and mandates. |
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Turn the fuel supply to the "OFF" position.
- Remove bolts (2). Remove fuel priming pump assembly (1) and remove gasket (3) .
Illustration 1 | g01679834 |
Installation Procedure
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Position fuel priming pump assembly (1) and gasket (3) on the fuel filter base.
Illustration 2 | g01679834 |
- Install bolts (2). Tighten bolts (2) to a torque of 13 ± 3 N·m (115 ± 27 lb in).
- Turn the fuel supply to the "ON" position.
- Remove the air from the system. Refer to Testing and Adjusting, "Fuel System - Prime".