Air Starting Motor - Install
Show/hide table
 |
|
Fuel leaked or spilled onto hot surfaces or electrical components can cause a fire. Turn the disconnect switch OFF when draining and/or removing any fuel system components. |
Show/hide table
| NOTICE |
|---|
|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
Show/hide table
| |
| Illustration 1 | g01678898 |
- Attach a suitable lifting device to air starting motor (1). The weight of air starting motor (1) is approximately
95 kg (209 lb) . Position the gasket on the flywheel housing. Put air starting motor (1) in position on the rear housing. Install the washers and bolts (2) that hold air starting motor (1) in place. - Connect the tube assemblies to air starting motor (1).
- Turn ON the air supply at the air reservoir.
- If necessary, turn ON the gas supply if gas is being used.
Caterpillar Information System:
C15 Petroleum Engines Acceleration Is Poor or Throttle Response Is Poor
G3508J, G3516J, and G3520J Engines Air Starting Motor - Remove
Performance Issues Pertaining to Certain Industrial C15 Engines in Petroleum Applications{1915, 1920} Performance Issues Pertaining to Certain Industrial C15 Engines in Petroleum Applications{1915, 1920}
R250 Automatic Voltage Regulator Voltage Regulation
TH55FT-E70 and TH55FT-E90 Petroleum Transmissions Gear Pump (Transmission Charging)
320 Variable Gauge OEM Undercarriage Towing the Machine
2008/10/13 Software Files for AccuGrade® Are Now Available on SISWeb {7220, 7620}
Updating Engines that are Equipped with a Aftertreatment Regeneration Device (ARD) Purge Air Pump for the Caterpillar Regeneration System (CRS). {107P, 108M, 1743} Updating Engines that are Equipped with a Aftertreatment Regeneration Device (ARD) Purge Air Pump for the Caterpillar Regeneration System (CRS). {107P, 108M, 1743}
G3304 and G3306 Engines Electric Starting Motor
2009/03/23 Improved Valve Bridges {1102, 1121, 1123}
3500 Generator Set Engines Engine Coolant Temperature Sensor
G3516 Petroleum Engines Electronic Control Module - Remove and Install
G3516 Petroleum Engines Gas Pressure Regulator - Remove
3408E and 3412E Engines for Caterpillar Built Machines Water Temperature Regulator
3500B and 3500C Marine Engines Camshaft
3500B Engines Air Inlet and Exhaust Lines
G3516 Petroleum Engines Gas Pressure Regulator - Install
C18 Fire Pump Industrial Engine Fuel Priming Pump - Remove and Install
C18 Fire Pump Industrial Engine Fuel Filter Base - Remove
C18 Fire Pump Industrial Engine Fuel Filter Base - Install
C18 Fire Pump Industrial Engine Turbocharger - Remove - Dual Turbocharger
C18 Fire Pump Industrial Engine Turbocharger - Install - Dual Turbocharger
3500B Generator Set Engines Turbocharger
3500B Engines for Caterpillar Built Power Modules Turbocharger