G3516 Petroleum Engines Caterpillar

Removal Procedure

Show/hide table

When servicing or repairing electric power generation equipment: Make sure the unit is off-line (disconnected from utility and/or other generators power service), and either locked out or tagged DO NOT OPERATE. Remove all fuses.

1. Disconnect the battery. Refer to Operation and Maintenance Manual, "Battery or Battery Cable - Disconnect".
   Show/hide table

   Illustration 1	g01677315

2. Open door (4) to electronic control module (2). Disconnect harness assemblies (5) and (8).

3. Disconnect ground strap (1).

4. Remove bolts (3), the mounts, the spacers, and electronic control module (2).

5. If necessary, remove bolts (6) and bracket (7).

Installation Procedure

Show/hide table

Illustration 2	g01677315

1. If necessary, position bracket (7) and install bolts (6).

2. Install electronic control module (2), the spacers, the mounts, and bolts (3).

3. Connect grounding strap (1). Position ground strap (1) between the bolt head and the washer.

4. Connect harness assemblies (5) and (8) to electronic control module (2). Close door (4).

5. Connect the battery. Refer to Operation and Maintenance Manual, "Battery or Battery Cable - Disconnect".