Fuel Filter Base - Remove
Removal Procedure
Show/hide table
| Required Tools | |||
|---|---|---|---|
| Tool | Part Number | Part Description | Qty |
| A | 185-3630 | Strap Wrench | 1 |
Show/hide table
| NOTICE |
|---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products. Dispose of all fluids according to local regulations and mandates. |
Show/hide table
| NOTICE |
|---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Turn the fuel supply to the "OFF" position.
- Disconnect hose assemblies (1) and tube assemblies (2) .
Show/hide table
 | |
| Illustration 1 | g01679901 |
- Disconnect harness assembly for fuel pressure sensor (3). Disconnect harness assembly for fuel temperature sensor (4) .
Show/hide table
 | |
| Illustration 2 | g01680175 |
- Use Tooling (A) to remove fuel filter (7) .
- Remove bolts (5) and remove fuel filter base (6) .
Caterpillar Information System:
C18 Fire Pump Industrial Engine Fuel Priming Pump - Remove and Install
G3516 Petroleum Engines Gas Pressure Regulator - Install
3500B Engines Air Inlet and Exhaust Lines
3500B and 3500C Marine Engines Camshaft
3408E and 3412E Engines for Caterpillar Built Machines Water Temperature Regulator
G3516 Petroleum Engines Gas Pressure Regulator - Remove
G3508B, G3512B, G3512B, G3516B and G3520B Petroleum Engines Air Starting Motor - Install
C15 Petroleum Engines Acceleration Is Poor or Throttle Response Is Poor
G3508J, G3516J, and G3520J Engines Air Starting Motor - Remove
Performance Issues Pertaining to Certain Industrial C15 Engines in Petroleum Applications{1915, 1920} Performance Issues Pertaining to Certain Industrial C15 Engines in Petroleum Applications{1915, 1920}
R250 Automatic Voltage Regulator Voltage Regulation
TH55FT-E70 and TH55FT-E90 Petroleum Transmissions Gear Pump (Transmission Charging)
C18 Fire Pump Industrial Engine Fuel Filter Base - Install
C18 Fire Pump Industrial Engine Turbocharger - Remove - Dual Turbocharger
C18 Fire Pump Industrial Engine Turbocharger - Install - Dual Turbocharger
3500B Generator Set Engines Turbocharger
3500B Engines for Caterpillar Built Power Modules Turbocharger
320D and 323D Excavators Machine System Specifications Grease Lines
G3508B, G3512B, G3512B, G3516B and G3520B Petroleum Engines Exhaust Elbow - Remove and Install
Upgrade to Air/Fuel Ratio Control, Nitrogen Oxide Sensor, and a Single Turbocharger for Enhanced Performance of G3508 Engines{1000, 1052, 1270, 191N} Upgrade to Air/Fuel Ratio Control, Nitrogen Oxide Sensor, and a Single Turbocharger for Enhanced Performance of G3508 Engines{1000, 1052, 1270, 191N}
R250 Automatic Voltage Regulator High Voltage
Parts for Updating Early 3406E Aftercooler Cores{1063} Parts for Updating Early 3406E Aftercooler Cores{1063}
R250 Automatic Voltage Regulator General Information
G3508B, G3512B, G3512B, G3516B and G3520B Petroleum Engines Aftercooler - Remove and Install