Ether Starting Aid Cylinder - Replace
Show/hide table
如果有人被困在车轮和车架之间,可能会发生人身伤亡。 转向系统由液压控制,运动时,车轮可能挤压人员。 当在车轮和车架之间工作时,一定要小心。 如果必须转向车轮,在进行任何移动前,确保所有人员远离机器。 |
Show/hide table
吸入乙醚蒸气或皮肤反复接触乙醚都可能导致人身伤害。 不遵守下列步骤将有可能造成人身伤亡。 只能在通风良好的地方使用乙醚。 更换乙醚罐时,不要吸烟。 小心使用乙醚以免失火。 不要将更换用的乙醚罐储存在生活区或驾驶室内。 不得将乙醚罐存放在阳光直射或温度高于 将罐弃置在安全的地方。 不要将罐挫穿或燃烧。 保存乙醚罐以使无关人员无法擅自动用。 |
注: 为便于检修辅助起动乙醚罐,需要使用适当的并符合当地规章的便携式检修系统(扶梯、阶梯组件、升降台或其他便携式检修系统)。
Show/hide table
图 1 | g01663073 |
- 准备维修的机器。 请参阅操作和保养手册, "使机器作好保养准备"。
- 打开后罩盖。
- 松开夹箍 (1) 并拧松辅助起动乙醚罐 (2)。
- 卸下辅助起动乙醚罐已用过的密封垫,然后为辅助起动乙醚罐安装新的密封垫。
- 安装新的辅助起动乙醚罐。 拧紧卡箍。 关闭后罩盖。
Caterpillar Information System:
345D and 349D Excavators C13 Engine Supplement Fan - Remove
Plugging of the In-line Fuel Filters for the Aftertreatment Regeneration Device (ARD){108M, 1261, 3206} Plugging of the In-line Fuel Filters for the Aftertreatment Regeneration Device (ARD){108M, 1261, 3206}
2008/10/06 New Improved Fuel Injectors Are Now Used {1251, 1290}
3516B Power Package Maintenance Interval Schedule
345D and 349D Excavators C13 Engine Supplement Fuel Priming Pump and Primary Filter (Water Separator) - Assemble
345D and 349D Excavators C13 Engine Supplement Fuel Priming Pump and Primary Filter (Water Separator) - Disassemble
C6.6 Marine Generator Set Engine Oil Filter Base - Remove and Install - MCS Engine Oil Filter Base
C6.6 Marine Generator Set Fuel Filter Base - Remove and Install - MCS Secondary Fuel Filter
G3304 and G3306 Engines Exhaust Manifold
C6.6 Marine Generator Set Fuel Filter Base - Remove and Install - MCS Primary Fuel Filter
3500 Generator Sets Configuration Parameters
TH31-C9I, TH31-C9P, TH31-C9T, TH35-C11I, TH35-C13I, TH35-C13T, TH35-C15I and TH35-C15T Petroleum Power Train Packages and TH31-E61 and TH35-E81 Petroleum Transmissions Power Train Electronic Control System Electronic Control Unit - Replace
2008/09/29 A New Type of Main Bearing is Available {1202, 1203}
2008/10/01 A New Type of Main Bearing is Available {1202, 1203}
Location Updates Are Not Being Reported From The Product Link PL321{7606} Location Updates Are Not Being Reported From The Product Link PL321{7606}
C6.6 Marine Generator Set Heater Mounting Group - 240 Volt
C6.6 Marine Generator Set Heater Mounting Group - 110 Volt
C6.6 Marine Generator Set Control System - Remove and Install - M.C.S Panel
C6.6 Marine Generator Set Fuel Injection Lines
345D, 349D and 349D2 Excavators and 345D MHPU and 349D MHPU Mobile Hydraulic Power Units Machine Systems Bucket Cylinder - Remove and Install
345D, 349D and 349D2 Excavators and 345D MHPU and 349D MHPU Mobile Hydraulic Power Units Machine Systems Load Control Valve (Boom Lowering) - Remove
345D, 349D and 349D2 Excavators and 345D MHPU and 349D MHPU Mobile Hydraulic Power Units Machine Systems Load Control Valve (Boom Cylinder) - Remove
345D, 349D and 349D2 Excavators and 345D MHPU and 349D MHPU Mobile Hydraulic Power Units Machine Systems Boom Cylinder - Remove and Install
345D, 349D and 349D2 Excavators and 345D MHPU and 349D MHPU Mobile Hydraulic Power Units Machine Systems Boom - Remove