Exhaust Manifold
Show/hide table
 | |
| Illustration 1 | g01661734 |
Show/hide table
 | |
| Illustration 2 | g01661733 |
(1) Torque for four taperlock studs ... 30 ± 5 N·m (22 ± 4 lb ft)
(2) Lubricate the bore of the O-ring seal with glycerin or approved equivalent.
(3) Lubricate the threads of five bolts with 4C-5599 Anti-Seize Compound .
(4) Lubricate the threads of the pipe plug with 4C-5599 Anti-Seize Compound.
Caterpillar Information System:
C6.6 Marine Generator Set Fuel Filter Base - Remove and Install - MCS Primary Fuel Filter
3500 Generator Sets Configuration Parameters
TH31-C9I, TH31-C9P, TH31-C9T, TH35-C11I, TH35-C13I, TH35-C13T, TH35-C15I and TH35-C15T Petroleum Power Train Packages and TH31-E61 and TH35-E81 Petroleum Transmissions Power Train Electronic Control System Electronic Control Unit - Replace
C4.4 Generator Set Engines CID 0247 FMI 12
C4.4 Generator Set Engines CID 0247 FMI 09
C175-16 Marine Engines Maintenance Recommendations
C4.4 Generator Set Engines Can Not Reach Top Engine RPM
C4.4 Generator Set Engines Sensors and Electrical Connectors
345D and 349D Excavators C13 Engine Supplement Fuel Filter (Secondary) and Fuel Filter Base - Remove and Install
345D and 349D Excavators C13 Engine Supplement Fuel Priming Pump and Primary Filter (Water Separator) - Install
345D and 349D Excavators C13 Engine Supplement Fuel Priming Pump and Primary Filter (Water Separator) - Remove
C13, C15, and C18 Generator Set Engines Magnetic Pickup
C6.6 Marine Generator Set Fuel Filter Base - Remove and Install - MCS Secondary Fuel Filter
C6.6 Marine Generator Set Engine Oil Filter Base - Remove and Install - MCS Engine Oil Filter Base
345D and 349D Excavators C13 Engine Supplement Fuel Priming Pump and Primary Filter (Water Separator) - Disassemble
345D and 349D Excavators C13 Engine Supplement Fuel Priming Pump and Primary Filter (Water Separator) - Assemble
3516B Power Package Maintenance Interval Schedule
2008/10/06 New Improved Fuel Injectors Are Now Used {1251, 1290}
Plugging of the In-line Fuel Filters for the Aftertreatment Regeneration Device (ARD){108M, 1261, 3206} Plugging of the In-line Fuel Filters for the Aftertreatment Regeneration Device (ARD){108M, 1261, 3206}
345D and 349D Excavators C13 Engine Supplement Fan - Remove
795F AC and 795F AC XQ Off-Highway Trucks Ether Starting Aid Cylinder - Replace
2008/09/29 A New Type of Main Bearing is Available {1202, 1203}
2008/10/01 A New Type of Main Bearing is Available {1202, 1203}
Location Updates Are Not Being Reported From The Product Link PL321{7606} Location Updates Are Not Being Reported From The Product Link PL321{7606}