1978/10/09 Caterpillar


4J7533 O-Ring Seals Now Available For Parts Service Of The 5P4150 Nozzle Tester Group{0651}

Usage:


A 4J7533 O-Ring Seal is now available for parts service of the 5P4150 Nozzle Tester Group. See the Illustration. If there is leakage at any of the hand valves, install a 4J7533 O-Ring Seal in place of the existing seal.


Location where seals are used on valves.

Caterpillar Information System:

1978/10/09 Salvage Of Turbocharger Compressor Housing During Reconditioning{1052}
1978/10/09 Never Use Copper Tubing As A Replacement For Steel Brake Lines{4257,7554}
1978/09/25 New 6V1 Seal Kit Available For Service Repair Of High Pressure Tee Test Couplers{0623,7555,5057}
1978/09/25 Adjustment Procedures And Lubrication Recommendations For Drive Pulleys On Caterpillar Fuel Injection Test Bench{0652}
1978/09/25 Tips For Service Information Retrieval System (SIRS) Users{0374}
1978/09/25 Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25 New Springs Available For Forward And Reverse Clutches, And New Tool To Correctly Position The Clutches Of Twin Disc MG514 Marine Transmission{3302,0626}
1978/09/18 Permanent Installation Quick Disconnects For Pressure Testing Now Available{0651}
1978/09/18 Tips For Service Information Retrieval System (SIRS) Users{0374}
1978/09/11 Correct Installation Of Crankshaft Thrust Plates Is Very Important To Prevent Engine Damage{1203}
1978/09/11 New Diaphragm Used In Mechanical Shut-Off Groups Has Identification For Correct Installation{7418}
1978/09/11 New Drive Adapters For Fuel Injection Test Bench{0650}
1978/10/09 Improvements To The 6N5906 Electric Service Meter{7480}
1978/10/09 New Head Assemblies, Head Gaskets, And Spacer Plate Gaskets Prevent Oil Leakage At The Spacer Plate{1101,1113}
1978/10/09 A New 5P9698 Frequency Calibrator Is Available For The Calibration Of Caterpillar Diagnostic Tools{0651}
1978/10/09 5P9736 Bracket-Link Now Available For Parts Service{0644}
1978/10/16 New Switch Group Used In Several Applications{1416}
1978/10/16 Caterpillar Fuel Injection Test Bench Book{0374}
1978/10/16 Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16 New Transmission Mounting Group Has Improved Design For Longer Service Life{1150,3000}
1978/10/16 Tips For Service Information Retrieval System (SIRS) Users{0374}
1978/10/23 Conversion Of Testers In Earlier 1P3550 Wiring Harness Tester Groups To Use Later Test Harness Assemblies With Receptacle Connections{0650,0651,1408}
1978/10/23 5P8690 Fixture Group And 5P8691 Socket Are Available For Easier Reconditioning Of 5M4169 Cam Followers{0622}
1978/10/23 In The Future There Will Be A Common Warning System For All Caterpillar Machines{7450,7301,7400}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.