1978/09/25 Caterpillar


New 6V1 Seal Kit Available For Service Repair Of High Pressure Tee Test Couplers{0623,7555,5057}

Usage:


A new 6V1 Seal Kit is now available for repair of the 2P8335 Plain Coupler Assembly and 2P8337 Valved Coupler Assembly. These coupler assemblies are used with the hydraulic flow meter when you are troubleshooting hydraulic implement systems.

The 6V1 Seal Kit has all the seals and back-up rings needed for repair of either coupler assembly.

Caterpillar Information System:

1978/09/25 Adjustment Procedures And Lubrication Recommendations For Drive Pulleys On Caterpillar Fuel Injection Test Bench{0652}
1978/09/25 Tips For Service Information Retrieval System (SIRS) Users{0374}
1978/09/25 Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25 New Springs Available For Forward And Reverse Clutches, And New Tool To Correctly Position The Clutches Of Twin Disc MG514 Marine Transmission{3302,0626}
1978/09/18 Permanent Installation Quick Disconnects For Pressure Testing Now Available{0651}
1978/09/18 Tips For Service Information Retrieval System (SIRS) Users{0374}
1978/09/11 Correct Installation Of Crankshaft Thrust Plates Is Very Important To Prevent Engine Damage{1203}
1978/09/11 New Diaphragm Used In Mechanical Shut-Off Groups Has Identification For Correct Installation{7418}
1978/09/11 New Drive Adapters For Fuel Injection Test Bench{0650}
1978/09/04 New Water Pump Gives More Pressure{1361}
1978/09/04 New Nozzle Assembly Used In Fuel Injection Valves{1254}
1978/09/04 New Gasket Used In Exhaust Manifold Group{1059}
1978/10/09 Never Use Copper Tubing As A Replacement For Steel Brake Lines{4257,7554}
1978/10/09 Salvage Of Turbocharger Compressor Housing During Reconditioning{1052}
1978/10/09 4J7533 O-Ring Seals Now Available For Parts Service Of The 5P4150 Nozzle Tester Group{0651}
1978/10/09 Improvements To The 6N5906 Electric Service Meter{7480}
1978/10/09 New Head Assemblies, Head Gaskets, And Spacer Plate Gaskets Prevent Oil Leakage At The Spacer Plate{1101,1113}
1978/10/09 A New 5P9698 Frequency Calibrator Is Available For The Calibration Of Caterpillar Diagnostic Tools{0651}
1978/10/09 5P9736 Bracket-Link Now Available For Parts Service{0644}
1978/10/16 New Switch Group Used In Several Applications{1416}
1978/10/16 Caterpillar Fuel Injection Test Bench Book{0374}
1978/10/16 Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16 New Transmission Mounting Group Has Improved Design For Longer Service Life{1150,3000}
1978/10/16 Tips For Service Information Retrieval System (SIRS) Users{0374}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.