1978/09/18 Caterpillar


Tips For Service Information Retrieval System (SIRS) Users{0374}

Usage:



Sirs Index--Miscellaneous Items And Special Publications

At the end of the SIRS INDEX are two fiche with no model identification on the heading. Each fiche has a special purpose.


Two important fiche in your SIRS Index are "Miscellaneous Items" and "Special Publications".

... Miscellaneous Items. If you cannot find an article or instruction under a model name, look at the fiche titled "MISCELLANEOUS ITEMS". If the article you need is general in nature, you will find it on this fiche in component code sequence. Examples of such articles are announcements of new tools, seals, turbocharger parts and track adjustments.

... Special Publications. Some magazines and booklets are printed one time. They are shown on the last fiche in the SIRS Index called "SPECIAL PUBLICATIONS". On this fiche you will find "Guidelines for Reusable Parts", "Analyzing Failure" booklets and "Successful Engine Service". These booklets are listed one time in Component Code order of the subject matter.

Caterpillar Information System:

1978/09/11 Correct Installation Of Crankshaft Thrust Plates Is Very Important To Prevent Engine Damage{1203}
1978/09/11 New Diaphragm Used In Mechanical Shut-Off Groups Has Identification For Correct Installation{7418}
1978/09/11 New Drive Adapters For Fuel Injection Test Bench{0650}
1978/09/04 New Water Pump Gives More Pressure{1361}
1978/09/04 New Nozzle Assembly Used In Fuel Injection Valves{1254}
1978/09/04 New Gasket Used In Exhaust Manifold Group{1059}
1978/09/04 Correct Procedure To Adjust Front Power Takeoff Clutches{3055}
1978/09/04 New Torque Specification Used On Bolts That Hold The Cylinder Head{1101}
1978/09/04 New Vent Tube For Water Cooled Turbocharger{1380,1052}
1978/09/04 New Camshaft Rear Bearing For The Sleeve Metering Fuel System{1253}
1978/08/28 Different O-Ring Seals Now Used In Fuel Injection Pump Group{1251}
1978/08/28 New Oil Supply Line And Gasket For Turbocharger{1307,1052}
1978/09/18 Permanent Installation Quick Disconnects For Pressure Testing Now Available{0651}
1978/09/25 New Springs Available For Forward And Reverse Clutches, And New Tool To Correctly Position The Clutches Of Twin Disc MG514 Marine Transmission{3302,0626}
1978/09/25 Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25 Tips For Service Information Retrieval System (SIRS) Users{0374}
1978/09/25 Adjustment Procedures And Lubrication Recommendations For Drive Pulleys On Caterpillar Fuel Injection Test Bench{0652}
1978/09/25 New 6V1 Seal Kit Available For Service Repair Of High Pressure Tee Test Couplers{0623,7555,5057}
1978/10/09 Never Use Copper Tubing As A Replacement For Steel Brake Lines{4257,7554}
1978/10/09 Salvage Of Turbocharger Compressor Housing During Reconditioning{1052}
1978/10/09 4J7533 O-Ring Seals Now Available For Parts Service Of The 5P4150 Nozzle Tester Group{0651}
1978/10/09 Improvements To The 6N5906 Electric Service Meter{7480}
1978/10/09 New Head Assemblies, Head Gaskets, And Spacer Plate Gaskets Prevent Oil Leakage At The Spacer Plate{1101,1113}
1978/10/09 A New 5P9698 Frequency Calibrator Is Available For The Calibration Of Caterpillar Diagnostic Tools{0651}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.