Flywheel Housing - Remove and Install
Start By:
- Remove the electric starting motor. Refer to Disassembly and Assembly, "Electric Starting Motor - Remove and Install".
- Remove the flywheel. Refer to Disassembly and Assembly, "Flywheel - Remove".
- Support the engine.
Show/hide table
Illustration 1 g01132273 - Attach a suitable lifting device to flywheel housing (2). The weight of flywheel housing (2) is approximately
62 kg (137 lb) . - Remove bolts (1) and flywheel housing (2).
Show/hide table
Required Tools | |||
Tool | Part Number | Part Description | Qty |
A | 1U-8846 | Gasket Sealant | 1 |
- Apply Tooling (A) to the face of the cylinder block.
Show/hide table
Illustration 2 g01132273 - Attach a suitable lifting device to flywheel housing (2). The weight of flywheel housing (2) is approximately
62 kg (137 lb) . Position flywheel housing (2) on the rear of the cylinder block. - Install bolts (1).
End By:
- Install the flywheel. Refer to Disassembly and Assembly, "Flywheel - Install".
- Install the electric starting motor. Refer to Disassembly and Assembly, "Electric Starting Motor - Remove and Install".
Caterpillar Information System:
2008/03/24 New Check Valves are Now Used on the Oscillating Axle on Excavators {5468}
C11 and C13 Petroleum Engines Crankshaft Rear Seal - Install
C11 and C13 Petroleum Engines Crankshaft Rear Seal - Remove
C11 and C13 Petroleum Engines Flywheel - Install
C13 and C15 Engines for Combat and Tactical Vehicles Air Inlet Shutoff Circuit - Test
C11 and C13 Petroleum Engines Flywheel - Remove
2008/07/21 Improved Fuel Injection Pump {1251, 1714}
C11 and C13 Petroleum Engines Water Temperature Regulator - Remove and Install
C11 and C13 Petroleum Engines Water Pump - Install
2008/04/21 Improved Exhaust Risers and Brackets are Now Used {1059}
2008/02/11 Use of Remanufactured Injectors in Marine Engines {1290}
C11 and C13 Petroleum Engines Water Pump - Remove
Software Update for Model Year 2007 C7 On-Highway Engine in General Motor Chassis{1901} Software Update for Model Year 2007 C7 On-Highway Engine in General Motor Chassis{1901}
Installation Instructions for the New Caterpillar Digital Voltage Regulator (CDVR) In Field Retrofit Applications{4467} Installation Instructions for the New Caterpillar Digital Voltage Regulator (CDVR) In Field Retrofit Applications{4467}
C11 and C13 Petroleum Engines Accessory Drive - Remove
345D, 349D and 349D2 Excavators Hydraulic System Engine Performance - Test - Engine Speed
C11 and C13 Petroleum Engines Accessory Drive - Install
345D, 349D and 349D2 Excavators Hydraulic System Travel on Level Ground - Test - Optional Test
C4.4 Industrial Engine Accessory Drive - Remove
C4.4 Industrial Engine Accessory Drive - Disassemble
C4.4 Industrial Engine Accessory Drive - Assemble
C4.4 Industrial Engine Accessory Drive - Install
Procedure for Cleaning Ash from the Diesel Particulate Filter (DPF) for Certain Caterpillar Engines{108F, 1091} Procedure for Cleaning Ash from the Diesel Particulate Filter (DPF) for Certain Caterpillar Engines{108F, 1091}
Procedure to Handle and Ship Diesel Particulate Filters (DPF) and Catalytic Converter Mufflers (CCM){1091, 1091} Procedure to Handle and Ship Diesel Particulate Filters (DPF) and Catalytic Converter Mufflers (CCM){1091, 1091}