Crankshaft Rear Seal - Remove
Start By:
- Remove the flywheel. Refer to Disassembly and Assembly, "Flywheel - Remove".
Show/hide table
| NOTICE |
|---|
|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, PERJ1017, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products. Dispose of all fluids according to local regulations and mandates. |
- Remove bolts (1).
- Remove crankshaft rear seal (2).
Show/hide table
| |
| Illustration 1 | g01132235 |
Note: Refer to Reuse and Salvage Guidelines, SEBF8042, "Reuse and Salvage for Crankshafts" for the correct inspection procedure of the crankshaft seal surface and the correct specifications of the crankshaft.
Caterpillar Information System:
C11 and C13 Petroleum Engines Flywheel - Install
C13 and C15 Engines for Combat and Tactical Vehicles Air Inlet Shutoff Circuit - Test
C11 and C13 Petroleum Engines Flywheel - Remove
2008/07/21 Improved Fuel Injection Pump {1251, 1714}
C11 and C13 Petroleum Engines Water Temperature Regulator - Remove and Install
C11 and C13 Petroleum Engines Water Pump - Install
2008/04/21 Improved Exhaust Risers and Brackets are Now Used {1059}
2008/02/11 Use of Remanufactured Injectors in Marine Engines {1290}
C11 and C13 Petroleum Engines Water Pump - Remove
A New Purge Pump and Service Pack are Now Used{107P} A New Purge Pump and Service Pack are Now Used{107P}
2008/04/14 New Processes Improve Registration of Product Link {7338, 7606}
C11 and C13 Petroleum Engines Engine Oil Cooler - Install
C11 and C13 Petroleum Engines Crankshaft Rear Seal - Install
2008/03/24 New Check Valves are Now Used on the Oscillating Axle on Excavators {5468}
C11 and C13 Petroleum Engines Flywheel Housing - Remove and Install
Software Update for Model Year 2007 C7 On-Highway Engine in General Motor Chassis{1901} Software Update for Model Year 2007 C7 On-Highway Engine in General Motor Chassis{1901}
Installation Instructions for the New Caterpillar Digital Voltage Regulator (CDVR) In Field Retrofit Applications{4467} Installation Instructions for the New Caterpillar Digital Voltage Regulator (CDVR) In Field Retrofit Applications{4467}
C11 and C13 Petroleum Engines Accessory Drive - Remove
345D, 349D and 349D2 Excavators Hydraulic System Engine Performance - Test - Engine Speed
C11 and C13 Petroleum Engines Accessory Drive - Install
345D, 349D and 349D2 Excavators Hydraulic System Travel on Level Ground - Test - Optional Test
C4.4 Industrial Engine Accessory Drive - Remove
C4.4 Industrial Engine Accessory Drive - Disassemble
C4.4 Industrial Engine Accessory Drive - Assemble