Water Pump - Install
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Position water pump (5) on the engine.
- Install bolts (6).
- Install tube assembly (3) and tube assembly (4).
Show/hide table
Illustration 2 g01453211 - Install housing (2).
- Install bolts (1).
- Fill the coolant system. Refer to Operation and Maintenance Manual, "Refill Capacities and Recommendations".
Show/hide table
Illustration 1 | g01453212 |
Caterpillar Information System:
2008/04/21 Improved Exhaust Risers and Brackets are Now Used {1059}
2008/02/11 Use of Remanufactured Injectors in Marine Engines {1290}
C11 and C13 Petroleum Engines Water Pump - Remove
A New Purge Pump and Service Pack are Now Used{107P} A New Purge Pump and Service Pack are Now Used{107P}
2008/04/14 New Processes Improve Registration of Product Link {7338, 7606}
C11 and C13 Petroleum Engines Engine Oil Cooler - Install
C18 Industrial Engines Speed Sensor - Clean/Inspect
Downloading Programs to Power Generation Equipment with the Execloader Software{7620} Downloading Programs to Power Generation Equipment with the Execloader Software{7620}
C11 and C13 Petroleum Engines Engine Oil Cooler - Remove
C11 and C13 Petroleum Engines Exhaust Manifold - Remove and Install
Seizure of Thermocouple Threads in Some G3500C and G3500E Exhaust Manifolds{1408, 1900, 7498} Seizure of Thermocouple Threads in Some G3500C and G3500E Exhaust Manifolds{1408, 1900, 7498}
2008/05/19 Improved Oil Return Lines for the Turbocharger are Used {1052, 1307}
C11 and C13 Petroleum Engines Water Temperature Regulator - Remove and Install
2008/07/21 Improved Fuel Injection Pump {1251, 1714}
C11 and C13 Petroleum Engines Flywheel - Remove
C13 and C15 Engines for Combat and Tactical Vehicles Air Inlet Shutoff Circuit - Test
C11 and C13 Petroleum Engines Flywheel - Install
C11 and C13 Petroleum Engines Crankshaft Rear Seal - Remove
C11 and C13 Petroleum Engines Crankshaft Rear Seal - Install
2008/03/24 New Check Valves are Now Used on the Oscillating Axle on Excavators {5468}
C11 and C13 Petroleum Engines Flywheel Housing - Remove and Install
Software Update for Model Year 2007 C7 On-Highway Engine in General Motor Chassis{1901} Software Update for Model Year 2007 C7 On-Highway Engine in General Motor Chassis{1901}
Installation Instructions for the New Caterpillar Digital Voltage Regulator (CDVR) In Field Retrofit Applications{4467} Installation Instructions for the New Caterpillar Digital Voltage Regulator (CDVR) In Field Retrofit Applications{4467}
C11 and C13 Petroleum Engines Accessory Drive - Remove