Flywheel - Remove
Show/hide table
Required Tools | |||
Tool | Part Number | Part Description | Qty |
A | 138-7574 | Link Bracket | 1 |
B | FT2712 | Guide Stud | 1 |
- Attach Tooling (A) and a suitable lifting device to flywheel (1). The weight of flywheel (1) is approximately
50 kg (110 lb) . - Remove top bolt (2). Install Tooling (B).
- Remove remaining bolts (2).
- Remove flywheel (1).
- Use a hammer and a punch in order to remove the ring gear.
Show/hide table
Illustration 1 | g01453454 |
Caterpillar Information System:
2008/07/21 Improved Fuel Injection Pump {1251, 1714}
C11 and C13 Petroleum Engines Water Temperature Regulator - Remove and Install
C11 and C13 Petroleum Engines Water Pump - Install
2008/04/21 Improved Exhaust Risers and Brackets are Now Used {1059}
2008/02/11 Use of Remanufactured Injectors in Marine Engines {1290}
C11 and C13 Petroleum Engines Water Pump - Remove
A New Purge Pump and Service Pack are Now Used{107P} A New Purge Pump and Service Pack are Now Used{107P}
2008/04/14 New Processes Improve Registration of Product Link {7338, 7606}
C11 and C13 Petroleum Engines Engine Oil Cooler - Install
C18 Industrial Engines Speed Sensor - Clean/Inspect
Downloading Programs to Power Generation Equipment with the Execloader Software{7620} Downloading Programs to Power Generation Equipment with the Execloader Software{7620}
C11 and C13 Petroleum Engines Engine Oil Cooler - Remove
C13 and C15 Engines for Combat and Tactical Vehicles Air Inlet Shutoff Circuit - Test
C11 and C13 Petroleum Engines Flywheel - Install
C11 and C13 Petroleum Engines Crankshaft Rear Seal - Remove
C11 and C13 Petroleum Engines Crankshaft Rear Seal - Install
2008/03/24 New Check Valves are Now Used on the Oscillating Axle on Excavators {5468}
C11 and C13 Petroleum Engines Flywheel Housing - Remove and Install
Software Update for Model Year 2007 C7 On-Highway Engine in General Motor Chassis{1901} Software Update for Model Year 2007 C7 On-Highway Engine in General Motor Chassis{1901}
Installation Instructions for the New Caterpillar Digital Voltage Regulator (CDVR) In Field Retrofit Applications{4467} Installation Instructions for the New Caterpillar Digital Voltage Regulator (CDVR) In Field Retrofit Applications{4467}
C11 and C13 Petroleum Engines Accessory Drive - Remove
345D, 349D and 349D2 Excavators Hydraulic System Engine Performance - Test - Engine Speed
C11 and C13 Petroleum Engines Accessory Drive - Install
345D, 349D and 349D2 Excavators Hydraulic System Travel on Level Ground - Test - Optional Test