903D Compact Wheel Loader Machine Systems Caterpillar


Tilt Link - Remove and Install

Usage:

903D MZY

Removal Procedure

Table 1
Required Tooling 
Item  Part Number  Part Description  Qty 
5P-7428  Bearing Adapter 
9U-6833 Nut 
4C-9633 Puller Stud 
6V-3160 Double Acting Cylinder 
350-7768 Electric Hydraulic Pump Gp(115V) 
350-7769 Electric Hydraulic Pump Gp(230V)   
FT-1410 Sleeve 

  1. Position the bucket or the quick coupler on the ground or on suitable cribbing.

  2. Release hydraulic system pressure. Refer to Operation and Maintenance Manual, "System Pressure Release".


    Illustration 1g06347249

  3. Remove bolts (1). Remove plate (3). Remove pin assembly (2).


    Illustration 2g06347246

  4. Remove bolts (5). Remove plate (4). Remove pin assembly (6) and tilt link (7).


    Illustration 3g06347989


    Illustration 4g06348003
    Typical Example

  5. Remove seals (9). Repeat for the other side of tilt link (7).

  6. Use Tooling (A) to remove bearings (8).

Installation Procedure

  1. Install tilt link (7) in the reverse order of removal.

    1. Align the holes in the bearings with the holes in tilt link (7).

    2. Lightly lubricate the sealing lips of seals (9) with the lubricant that is being sealed.

Caterpillar Information System:

D6 Track-Type Tractor Engine Supplement Electric Starting Motor - Remove and Install
The Exhaust Bypass May Fail on Certain 3500 Marine Engines {1057} The Exhaust Bypass May Fail on Certain 3500 Marine Engines {1057}
D6 Track-Type Tractor Machine Systems Piston Pump (Steering) - Assemble
D6 Track-Type Tractor Machine Systems Piston Pump (Steering) - Disassemble
D6 XE Track-Type Tractor Power Train Lubrication Distribution Manifold - Remove and Install
Procedure to Activate and Configure GRADE Connectivity on Certain Cat® Machines with Cellular Cat® Product Link Devices {7220} Procedure to Activate and Configure GRADE Connectivity on Certain Cat® Machines with Cellular Cat® Product Link Devices {7220}
New Turbocharger On Certain C7.1 Machine Engines {1052} New Turbocharger On Certain C7.1 Machine Engines {1052}
Improved Bevel Gear Set Is Now Available for Certain 854K Wheel Dozers and 992K Wheel Loaders {3254, 3256, 3258} Improved Bevel Gear Set Is Now Available for Certain 854K Wheel Dozers and 992K Wheel Loaders {3254, 3256, 3258}
988K XE Wheel Loader Generator (Phase Resistance) - Test
Improved Bracket Assembly Is Now Used for Air Aftercooler Lines Group on Certain Medium Wheel Loaders {1063, 1071} Improved Bracket Assembly Is Now Used for Air Aftercooler Lines Group on Certain Medium Wheel Loaders {1063, 1071}
Valve Cover Leaks on Certain C9.3 Machine Engines {1107} Valve Cover Leaks on Certain C9.3 Machine Engines {1107}
3512E Petroleum Engines Cylinder Liner Projection
330 GC and 330 Excavator Lifting Capacities - 330
Cat® Grade Control Calibration and Measure-Up Procedure for Certain Track-Type Tractors {7220} Cat® Grade Control Calibration and Measure-Up Procedure for Certain Track-Type Tractors {7220}
D6 Track-Type Tractor Machine Systems Air Conditioner and Heater Components - Remove and Install
D6 XE Track-Type Tractor Power Train Electronic Control Module (Power Inverter) - Remove and Install
330, 330GC Hydraulic Excavator Machine Systems Main Hydraulic Pump - Remove and Install
320 GC, 320 and 323 Excavator Machine Systems Travel System
Installation of the 560-3923 Front Lines Gp on Certain Excavators {5057} Installation of the 560-3923 Front Lines Gp on Certain Excavators {5057}
New Firmware Version is Now Available for MS955, MS975, and MS995 Global Navigation Satellite System (GNSS) Receivers {7600} New Firmware Version is Now Available for MS955, MS975, and MS995 Global Navigation Satellite System (GNSS) Receivers {7600}
C13B Industrial/Machine Engines Air Cleaner
330, 330GC Hydraulic Excavator Machine Systems Final Drive - Assemble
D6 Track-Type Tractor Systems Piston Pump (Implement)
Striker Bar Modification Is Now Available for HDXL Undercarriage on Certain Track-Type Tractors {7180} Striker Bar Modification Is Now Available for HDXL Undercarriage on Certain Track-Type Tractors {7180}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.