Final Drive - Assemble
参考: 专门说明书, "目视维修步骤 - 颜色和符号" M0066576。
Show/hide table
| 所需工具 | |||
| 工具 | 零件号 | 零件描述 | 数量 |
| A | 1P-2420 | 变速箱修复台 | 1 |
| B | 477-3161 | 连杆支架 | 3 |
| E | 5P-3931 | 防粘结剂 | - |
| F | 1U-5934 | Duo-Cone 密封件安装器组件 | 1 |
| G | 8C--8422 | 密封胶 | - |
| H | 4C-4030 | 螺纹锁固胶 | - |
注: 组装之前，先将所有要密封的部件涂上一薄层液压油。
Show/hide table
| |
| 图 1 | g06349088 |
Show/hide table
| |
| 图 2 | g06349092 |
|
请参阅 "Duo-Cone 通用密封件 - 安装"，了解正确的安装步骤。 | |
Show/hide table
| |
| 图 3 | g06349096 |
|
请参阅 "Duo-Cone 通用密封件 - 安装"，了解正确的安装步骤。 | |
Show/hide table
| |
| 图 4 | g06349106 |
Show/hide table
| |
| 图 5 | g06349114 |
|
(a) 轴承表面
(b) 壳体表面 | |
使用适当的压力和隔套以便在轴承上施加
减小轴承上的负载至
使用合适的深度千分尺以便测量轴承表面和壳体表面之间的步长。 在壳体周围几处不同的位置进行测量。 计算测得尺寸的平均值并记录该数字。 该尺寸称为 (X)。
Show/hide table
| |
| 图 6 | g06349117 |
|
使用合适的深度千分尺以便测量连接器齿轮的步长。 在齿轮周围几处不同的位置进行测量。 计算测得尺寸的平均值并记录该数字。 此尺寸称为 (Y)。 垫片的厚度等于 (X | |
注: 请勿使用超过两个垫片。 如果需要两个垫片，请将较薄的垫片靠齿轮安装。
Show/hide table
| |
| 图 7 | g06349121 |
Show/hide table
| |
| 图 8 | g06349129 |
Show/hide table
| |
| 图 9 | g06349134 |
Show/hide table
| |
| 图 10 | g06349138 |
Show/hide table
| |
| 图 11 | g06349139 |
|
在行星齿轮架中两侧的弹簧销孔中做出标桩记号。 各标桩记号应距离弹簧销孔外径大约 | |
Show/hide table
| |
| 图 12 | g06361933 |
Show/hide table
| |
| 图 13 | g06349199 |
Show/hide table
| |
| 图 14 | g06349205 |
Show/hide table
| |
| 图 15 | g06349210 |
Show/hide table
| |
| 图 16 | g06349212 |
|
在行星齿轮架中两侧的弹簧销孔中做出标桩记号。 各标桩记号应距离弹簧销孔外径大约 | |
Show/hide table
| |
| 图 17 | g06361938 |
Show/hide table
| |
| 图 18 | g06349218 |
Show/hide table
| |
| 图 19 | g06349229 |
Show/hide table
| |
| 图 20 | g06349240 |
Show/hide table
| |
| 图 21 | g06349245 |
Show/hide table
| |
| 图 22 | g06349255 |
结束:
- 安装终传动。
Caterpillar Information System:
C13B Industrial/Machine Engines Air Cleaner
New Firmware Version is Now Available for MS955, MS975, and MS995 Global Navigation Satellite System (GNSS) Receivers {7600} New Firmware Version is Now Available for MS955, MS975, and MS995 Global Navigation Satellite System (GNSS) Receivers {7600}
Installation of the 560-3923 Front Lines Gp on Certain Excavators {5057} Installation of the 560-3923 Front Lines Gp on Certain Excavators {5057}
320 GC, 320 and 323 Excavator Machine Systems Travel System
330, 330GC Hydraulic Excavator Machine Systems Main Hydraulic Pump - Remove and Install
D6 XE Track-Type Tractor Power Train Electronic Control Module (Power Inverter) - Remove and Install
D6 Track-Type Tractor Machine Systems Air Conditioner and Heater Components - Remove and Install
Cat® Grade Control Calibration and Measure-Up Procedure for Certain Track-Type Tractors {7220} Cat® Grade Control Calibration and Measure-Up Procedure for Certain Track-Type Tractors {7220}
330 GC and 330 Excavator Lifting Capacities - 330
903D Compact Wheel Loader Machine Systems Tilt Link - Remove and Install
D6 Track-Type Tractor Engine Supplement Electric Starting Motor - Remove and Install
The Exhaust Bypass May Fail on Certain 3500 Marine Engines {1057} The Exhaust Bypass May Fail on Certain 3500 Marine Engines {1057}
D6 Track-Type Tractor Systems Piston Pump (Implement)
Striker Bar Modification Is Now Available for HDXL Undercarriage on Certain Track-Type Tractors {7180} Striker Bar Modification Is Now Available for HDXL Undercarriage on Certain Track-Type Tractors {7180}
Next Gen GRADE 3D for Certain Track-Type Tractors GNSS Precision Tolerance - Set
D6 Track-Type Tractor Machine Systems Refrigerant Evaporator Core and Heater Core - Remove and Install
Updated Track Rollers with Improved Duo-Cone Seals are Now Used on Certain D6R and D6T Track-Type Tractors {4180} Updated Track Rollers with Improved Duo-Cone Seals are Now Used on Certain D6R and D6T Track-Type Tractors {4180}
Improved Clamps Are Now Used In The Water Lines Group on Certain D6T Track-Type Tractors {1380} Improved Clamps Are Now Used In The Water Lines Group on Certain D6T Track-Type Tractors {1380}
Improved Fuel Injector Nozzle Assembly is Now Used on Certain Track-Type Tractor Engines {1252, 1254} Improved Fuel Injector Nozzle Assembly is Now Used on Certain Track-Type Tractor Engines {1252, 1254}
Troubleshooting Procedure for Primary Software/Machine Control on Certain Compact Wheel Loaders {7490, 7600, 7610, 7620} Troubleshooting Procedure for Primary Software/Machine Control on Certain Compact Wheel Loaders {7490, 7600, 7610, 7620}
C9.3 Engine for Caterpillar Built Machines Cylinder Block
903D Compact Wheel Loader Machine Systems Joystick Control and Mounting - Remove and Install
D6 Track-Type Tractor Systems Machine Preparation
D6 Track-Type Tractor Systems Calibration Error Codes