Transmission Hydraulic Control - Install
安装步骤
- 定位变速箱液压控制装置 (11) 。 安装螺栓 (12) 。
Show/hide table
图 1 | g01436996 |
- 定位调节阀 (10) 。 从接头上拆下盖。 安装螺栓 (9) 。
Show/hide table
图 2 | g01436935 |
- 对于剩余的调节阀,重复步骤 2。
- 连接软管组件 (7) 。 拧紧软管组件 (7) 至扭矩 25 ± 3 N·m (18 ± 2 lb ft)。
- 连接线束组件 (8) 。
- 在要密封的 O 形密封圈 (6) 上稍微涂抹润滑剂。 将 O 形密封圈装在套筒 (5) 上。 安装套筒 (5) 。
Show/hide table
图 3 | g01436981 |
Show/hide table
图 4 | g01436980 |
- 定位软管组件 (3) ,然后安装法兰。 安装软管组件 (4) 。
Show/hide table
图 5 | g01436929 |
- 如有必要,安装新垫片。 定位盖 (2) 并拆下螺栓 (1) 。
Show/hide table
图 6 | g01436919 |
Caterpillar Information System:
TH55-E70 and TH55-E90 Petroleum Transmissions Transmission Hydraulic Control - Remove
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) GSC CID 0190 - FMI 02
2007/12/01 Procedure to Use the Correct Mounting Bolts with the 10R-2356 Flywheel As {1156}
2007/12/24 Procedure to Use the Correct Mounting Bolts with the 10R-2356 Flywheel As {1156}
2011/02/11 Procedure to Use the Correct Mounting Bolts with the 10R-2356 Flywheel As {1156}
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) GSC CID 0111 - FMI 03
2008/01/01 A New O-ring for the Injector Sleeve is Now Used {1100}
2008/01/07 A New O-ring for the Injector Sleeve is Now Used {1100}
C175 Generator Sets Fuel Related Components in Cold Weather
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) Indicators of Alarm Module or Remote Annunciator Are Constantly Flashing
G3600 Engines Starting - Test
G3600 Engines Air Starting Motor Problem
TH55-E70 and TH55-E90 Petroleum Transmissions Transmission Hydraulic Control - Disassemble
TH55-E70 and TH55-E90 Petroleum Transmissions Transmission Hydraulic Control - Assemble
G3500 A3 Engines Exhaust Temperature Module
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) GSC CID 0190 - FMI 03
C175-16 Locomotive Engine Water Pump
C13 and C15 On-highway Engines Engine Monitoring System
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) GSC CID 0268 - FMI 02
C9 Petroleum Engines Atmospheric Pressure Sensor - Remove and Install
C27 and C32 Engines for Caterpillar Built Machines Electronic Service Tool Does Not Communicate
C9 Petroleum Engines Coolant Temperature Sensor - Remove and Install
C9 Petroleum Engines Engine Oil Pressure Sensor - Remove and Install
3176C, 3406E and 3456 Industrial Engines Electrical Connectors